4M184002w_F8S - 第39页
Safety Precautions Safe-30 1OM-1840 1604-001 5. Alert Labels No. Alert Labels and Description (4) Description Only well-trained service personnel shall replace the cutter blades. Otherwise, a hand injury , etc., will r…

Safety Precautions
Safe-29
1OM-1840
1604-001
5. Alert Labels
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
Those who wear implanted pacemakers should not work inside the machine.
(2)
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape
accident.
(3)
Description
machine or air source. When maintenance or checks are performed with the power
or air turned ON, an electric shock or injury might be caused.

Safety Precautions
Safe-30
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.

Safety Precautions
Safe-31
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(7)
Description
When a cover (Cover (Door Type)) is opened or closed, be sure to hold the grip
might get caught in the door and get injured.
(8)
Description
Even when the power breaker is set to "OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
(9)
CAUTION
Your hand might be caught in the moving section. Do not
put your hand into the cover opening during the machine
operation.
Pay attention to the moving
mechanisms!
10-0249-
Description
Do not put your hand inside the machine while the machine is running.
Otherwise, your hand may be trapped in the moving mechanisms, causing injury.