4M184002w_F8S - 第40页
Safety Precautions Safe-31 1OM-1840 1604-001 5. Alert Labels No. Alert Labels and Description (7) Description When a cover (Cover (Door T ype)) is opened or closed, be sure to hold the grip …
Safety Precautions
Safe-30
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.
Safety Precautions
Safe-31
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(7)
Description
When a cover (Cover (Door Type)) is opened or closed, be sure to hold the grip
might get caught in the door and get injured.
(8)
Description
Even when the power breaker is set to "OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance
work.
(9)
CAUTION
Your hand might be caught in the moving section. Do not
put your hand into the cover opening during the machine
operation.
Pay attention to the moving
mechanisms!
10-0249-
Description
Do not put your hand inside the machine while the machine is running.
Otherwise, your hand may be trapped in the moving mechanisms, causing injury.
Safety Precautions
Safe-32
1OM-1840
1604-001
5. Alert Labels
No. Alert Labels and Description
(10)
Description
Do not put your hand in the moving area while the feeder base is moving up or
down.
feeder base is moving upward or downward.
(11)
Description
•
Do not bring any metal of high magnetizability close to this. Otherwise, such metal will easily
be magnetized and attracted, causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card or a watch close to the magnets.Such an object
can easily be affected by the magnetism. Otherwise, the data of the magnetic car might be
cleared or a watch, etc., may be damaged due to the strong magnetism.
(12)
Description
Do not drop a feeder. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any.