4M184002w_F8S - 第67页

4OM-1840 1-1-10 1604-001 T able 4A1-7 Device Name Inspection Cleaning, and Lubricating Spots Work Maintenance Cycle Daily Weekly Monthly Every 3 Months Every 6 Months Y early Every 2 years 4.8 X/Y Beam Section …

100%1 / 315
4OM-1840
1-1-91604-001
Table 4A1-6
Device Name
Inspection Cleaning,
and Lubricating Spots
Work
Maintenance Cycle
Daily Weekly
Monthly
Every
3 Months
Every
6 Months
Yearly
Every
2 years
4.6
Cutter Section
Cutter Unit
Cleaning

Lubrication
Movable Blade
Change

Change

Change
4.7 Head Section
Nozzle U/D Ball Screw
(NL Axis)
Cleaning,
Lubrication

Cleaning
Linear Measure Sensor
(Light Emitter and
Receiver)
Cleaning
Nozzle Change Cam Face
(Lower Side)
Cleaning,
Lubrication
Center Spline
Lubrication
Cam Follower
Cleaning,
Lubrication
Vacuum Filter
Change
Nozzle Filter
Change
Head U/D Ball Screw
(HL Axis)
Cleaning,
Lubrication
Head U/D Linear Guide
(HL Axis)
Cleaning,
Lubrication
*
Note
The head up/down ball screw (HL-axis) and the head up/down linear guide
(HL-axis) are applicable only to the SIGMA-F8S high-speed multi-purpose
head.
1.3 Items for Periodic Maintenance
4OM-1840
1-1-101604-001
Table 4A1-7
Device Name
Inspection Cleaning,
and Lubricating Spots
Work
Maintenance Cycle
Daily Weekly
Monthly
Every
3 Months
Every
6 Months
Yearly
Every
2 years
4.8 X/Y Beam Section

Inspection

Cleaning,
Lubrication
*
Y-Axis Linear Guide
Inspection
Y-Axis Linear Guide
Cleaning,
Lubrication
*

Cleaning,
Lubrication

Places
Inspection

Cleaning
Y-Axis Cable Side Face
Cleaning,
Lubrication
Y-Axis Cable Fixing
Places
Inspection
Y-Axis Linear Scale
Cleaning
4.9 PCB Positioning
Section
Upper Surface of Backup
Table
Cleaning
Ball Screw
Cleaning,
Lubrication
*
Ball Screw Spline
Cleaning,
Lubrication
4.10
Conveyor Section
Linear Guide
Cleaning,
Lubrication
*
Support Pin Detection
Sensors
Cleaning,
Lubrication
PCB Detection Sensor
Cleaning
4.11 Nozzle Stocker
Section
Nozzle Storage Section
Cleaning
Nozzle Stocker Sliding
Area
Cleaning,
Lubrication
Shutter Flange Pin Sliding
Section
Cleaning,
Lubrication
4.12 Control Box
Section
Filter
Cleaning
Note
The item "Ball Screw Spline (4.9 PCB Positioning Unit)" is for the system
where the Y510mm Single Transfer Unit (Factory option) has been mounted.
1.3 Items for Periodic Maintenance
4OM-1840
1-2-11604-001
2. Maintenance Check List
The periodic maintenance items (inspection, cleaning, lubrication, etc.) are

Use the tables below as check lists.
Reference
Refer to "3. Maintenance Spots" in "Chapter 1" for the spots to be maintained.
2.1 Daily Maintenance
Table 4A2-1
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
4.1 Air Source
Air Blowing Pressure
Inspection
----- -----
Main Air Pressure
Inspection
----- -----
4.2 Vacuum System
Vacuum Pressure
Inspection
----- -----
4.3 Component
Recognition
Camera Section
Component Recognition
Camera
Cleaning
----- Vacuum Tweezers,
Lens Cleaning Cloth
Component Storage Box
Cleaning
----- -----
4.5 Feeder Cart
Section
Upper Surface of Feeder
Base
Cleaning
----- Vacuum Cleaner, Rag
Scrap Box
Cleaning
----- -----
Reel Box
Cleaning
----- Vacuum Cleaner, Rag
4.6 Head Section
Linear Measure Sensor
(Light Emitter and
Receiver)
Cleaning
----- Absolute Ethanol,
Cotton Swab
4.7 X/Y Beam
Section

Inspection
----- -----
Y-Axis Linear Guide
Inspection
----- -----
2. Maintenance Check List