4M184002w_F8S - 第68页

4OM-1840 1-2-1 1604-001 2. Maintenance Check List The periodic maintenance items (inspection, cleaning, lubrication, etc.) are  Use the tables…

100%1 / 315
4OM-1840
1-1-101604-001
Table 4A1-7
Device Name
Inspection Cleaning,
and Lubricating Spots
Work
Maintenance Cycle
Daily Weekly
Monthly
Every
3 Months
Every
6 Months
Yearly
Every
2 years
4.8 X/Y Beam Section

Inspection

Cleaning,
Lubrication
*
Y-Axis Linear Guide
Inspection
Y-Axis Linear Guide
Cleaning,
Lubrication
*

Cleaning,
Lubrication

Places
Inspection

Cleaning
Y-Axis Cable Side Face
Cleaning,
Lubrication
Y-Axis Cable Fixing
Places
Inspection
Y-Axis Linear Scale
Cleaning
4.9 PCB Positioning
Section
Upper Surface of Backup
Table
Cleaning
Ball Screw
Cleaning,
Lubrication
*
Ball Screw Spline
Cleaning,
Lubrication
4.10
Conveyor Section
Linear Guide
Cleaning,
Lubrication
*
Support Pin Detection
Sensors
Cleaning,
Lubrication
PCB Detection Sensor
Cleaning
4.11 Nozzle Stocker
Section
Nozzle Storage Section
Cleaning
Nozzle Stocker Sliding
Area
Cleaning,
Lubrication
Shutter Flange Pin Sliding
Section
Cleaning,
Lubrication
4.12 Control Box
Section
Filter
Cleaning
Note
The item "Ball Screw Spline (4.9 PCB Positioning Unit)" is for the system
where the Y510mm Single Transfer Unit (Factory option) has been mounted.
1.3 Items for Periodic Maintenance
4OM-1840
1-2-11604-001
2. Maintenance Check List
The periodic maintenance items (inspection, cleaning, lubrication, etc.) are

Use the tables below as check lists.
Reference
Refer to "3. Maintenance Spots" in "Chapter 1" for the spots to be maintained.
2.1 Daily Maintenance
Table 4A2-1
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
4.1 Air Source
Air Blowing Pressure
Inspection
----- -----
Main Air Pressure
Inspection
----- -----
4.2 Vacuum System
Vacuum Pressure
Inspection
----- -----
4.3 Component
Recognition
Camera Section
Component Recognition
Camera
Cleaning
----- Vacuum Tweezers,
Lens Cleaning Cloth
Component Storage Box
Cleaning
----- -----
4.5 Feeder Cart
Section
Upper Surface of Feeder
Base
Cleaning
----- Vacuum Cleaner, Rag
Scrap Box
Cleaning
----- -----
Reel Box
Cleaning
----- Vacuum Cleaner, Rag
4.6 Head Section
Linear Measure Sensor
(Light Emitter and
Receiver)
Cleaning
----- Absolute Ethanol,
Cotton Swab
4.7 X/Y Beam
Section

Inspection
----- -----
Y-Axis Linear Guide
Inspection
----- -----
2. Maintenance Check List
4OM-1840
1-2-21604-001
2.2 Weekly Maintenance
Table 4A2-2
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
4.1 Air Source
Drain
Cleaning
----- Container
4.3 Component
Recognition
Camera Section
Fiducial Mark
Cleaning
----- Lens Cleaning Cloth
4.5 Feeder Cart
Section
Groove on Feeder Base
Cleaning
----- Vacuum Cleaner
4.7 Head Section
Vacuum Nozzle
Cleaning
----- Lens Cleaning Cloth,
Air Gun, Rag
Nozzle Filter
Change
----- Filter Insertion Jig
(High-Speed Nozzle),
Filter Insertion Jig
(Nozzle for Middle-Size and
Odd-Shape Components),
Filter Removing Jig
4.9 PCB Positioning
Section
Upper Surface of Feeder
Base
Cleaning
----- Vacuum Cleaner
4.10 Conveyor
Section
Support Pin Detection
Sensors
Cleaning
----- Rag
PCB Detection Sensor,
PCB Detection Sensor
Fiber
Cleaning
----- Rag
2.2 Weekly Maintenance