4M184002w_F8S - 第70页
4OM-1840 1-2-3 1604-001 2.3 Monthly Maintenance Grease Symbols MP1 : DAPHNE GREASE MP No. 1 T able 4A2-3 Object Unit Inspection, Cleaning, and Lubricating Spots Work Grease Required T ools Check 4.3 Component Recognition…
4OM-1840
1-2-21604-001
2.2 Weekly Maintenance
Table 4A2-2
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
4.1 Air Source
Drain
Cleaning
----- Container
4.3 Component
Recognition
Camera Section
Fiducial Mark
Cleaning
----- Lens Cleaning Cloth
4.5 Feeder Cart
Section
Groove on Feeder Base
Cleaning
----- Vacuum Cleaner
4.7 Head Section
Vacuum Nozzle
Cleaning
----- Lens Cleaning Cloth,
Air Gun, Rag
Nozzle Filter
Change
----- Filter Insertion Jig
(High-Speed Nozzle),
Filter Insertion Jig
(Nozzle for Middle-Size and
Odd-Shape Components),
Filter Removing Jig
4.9 PCB Positioning
Section
Upper Surface of Feeder
Base
Cleaning
----- Vacuum Cleaner
4.10 Conveyor
Section
Support Pin Detection
Sensors
Cleaning
----- Rag
PCB Detection Sensor,
PCB Detection Sensor
Fiber
Cleaning
----- Rag
2.2 Weekly Maintenance
4OM-1840
1-2-31604-001
2.3 Monthly Maintenance
Grease Symbols
MP1
: DAPHNE GREASE MP No. 1
Table 4A2-3
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
4.3 Component
Recognition
Camera Section
Teaching Plate
Cleaning
----- Rag
4.7 Head Section
Cleaning
----- Lens Cleaning Cloth
4.11 Nozzle Stocker
Section
Nozzle Storage Section
Cleaning
----- Vacuum Cleaner
2.3 Monthly Maintenance
4OM-1840
1-2-41604-001
2.4 Quarterly Maintenance
Grease Symbols
MP1
: DAPHNE GREASE MP No. 1
NM1
: MOLYNOC GREASE AP1
Notice
Lubrication must be made on the *-marked items after initial month and
every 3 months for the subsequent use.
Table 4A2-4
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
4.1 Air Source
Filter
Cleaning
----- Air Filter Case Jig
4.2 Vacuum System
Driving Section
Filter
Cleaning
-----
4.4 Feeder Base
Worm Gear
Lubrication
NM1
4.6 Feeder Cart
Section (Cutter)
OILES Guide
Lubrication
NM1
Cutter Unit Inside
Cleaning
NM1 Vacuum Cleaner
4.7 Head Section
Nozzle U/D Ball Screw
(NL Axis)
Cleaning,
Lubrication
MP1
Head U/D Ball Screw
(HL Axis)
Cleaning,
Lubrication
MP1
Head U/D Linear Guide
(HL Axis)
Cleaning,
Lubrication
MP1
Center Spline
Lubrication
MP1
Carn Follower
Cleaning,
Lubrication
MP1
Nozzle Change Carn
Face (Upper Side)
Cleaning,
Lubrication
MP1
Vacuum Filter
Replacement
-----
Vacuum Nozzle
Inspection
-----
Head U/D Ball Screw
(HL Axis)
Cleaning,
Lubrication
MP1
Head U/D Linear Guide
(HL Axis)
Cleaning,
Lubrication
MP1
4.8 X/Y Beam
Section
Cleaning,
Lubrication
MP1
* Y-Axis Linear Guide
Cleaning,
Lubrication
MP1
Cleaning
-----
Y-Axis Linear Scale
Cleaning
-----
4.9 PCB Positioning
Section
* Ball Screw
Cleaning,
Lubrication
MP1
4.10 Conveyor
Section
* Linear Guide
Cleaning,
Lubrication
MP1
Note
The head up/down ball screw (HL-axis) and the head up/down linear guide (HL-
axis) are applicable only to the SIGMA-F8S high-speed multi-purpose head.
2.4 Quarterly Maintenance