SIPLACE Station Software 7xx to 714 介绍
SIPLACE Station Software 7xx to 714.0 (R20 - 2) Feature Description 11/2020 Edition
SIPLACE
Station Software 7xx to 714.0 (R20-2)
Feature Description
11/2020 Edition
All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The
remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes
could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information given in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG Item-no.: 00197741-12
Rupert-Mayer-Strasse 44
81379 München
Germany
www.asm-smt.com
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
3
Contents
1 SIPLACE Station Software – Feature Description 13
2 Feature Description – Station Software V701.x 15
3 Feature Description – Station Software V702.x 17
3.1 New Placement Head SIPLACE CPP................................................................ 17
3.2 Support of Twin Head/HFH ................................................................................ 17
3.3 Configurable Nozzle Scan ................................................................................. 17
3.4 Extended Support of X-Feeders ........................................................................ 17
3.5 Tray Feeding ...................................................................................................... 18
3.6 New Conveyor Mode "Quad Lane" .................................................................... 18
3.7 Single Conveyor Mode on X4i ........................................................................... 19
3.8 New Dip Module LDU_X for X-Tables ............................................................... 20
3.9 Accuracy Check Tool (ACT) .............................................................................. 20
3.10 Fast Head Exchange ......................................................................................... 20
3.11 "Virtual PCB Stack" ............................................................................................ 21
3.12 Extension of the Form Editor (SIPLACE Vision) ................................................ 21
3.13 Auto Configuration ............................................................................................. 21
3.14 Reduced Air Consumption with Vacuum Pump ................................................. 21
3.15 Screen Saver ..................................................................................................... 21
3.16 Feeder Setting Comparison ............................................................................... 22
4 Feature Description – Station Software V703.x 23
4.1 X4i with New Electronic Concept ....................................................................... 23
4.2 SX1/SX2 placement machine ............................................................................ 23
4.3 C&P20 Placement Head .................................................................................... 23
4.4 Fast Head Exchange – Separating Component Camera from Head ................. 23
4.5 2x8mm X-Feeder ............................................................................................... 23
4.6 "IPTE Multi Stick Feeder" ................................................................................... 23
4.7 Long Board Option ............................................................................................. 24
4.8 Automatic Change to Manual Mode during Calibration ..................................... 24
4.9 Extension of SIPLACE Vision ............................................................................ 24
4.10 Supported Hardware Options with an Interface to Station Software 703 ........... 25
4.11 Nozzle Changer Configuration (TwinHead, C&P20A, CPP) .............................. 27
4.11.1 Magazine Carrier Numbering ............................................................................. 27
4.11.2 Reject Bins ......................................................................................................... 28
4.12 Gripper for TwinHead......................................................................................... 28
4.13 New PCB conveyor system ............................................................................... 29
4.13.1 Transport Modes ................................................................................................ 29
4.13.2 Fixed Rail Position in Single Conveyor Mode .................................................... 29
4.13.3 Calibration Data for Conveyor Control ............................................................... 29
4.13.4 Thick Board Option ............................................................................................ 29
4.13.5 Heavy Board Option .......................................................................................... 29
4.13.6 Rotational Angle Compensation for Short, Wide Boards ................................... 30
4.13.7 Display of Conveyor Input/Output States on the GUI ........................................ 30
4.13.8 Boards on Sensor in Input Conveyor ................................................................. 30
4.14 Changeover Tables 60 and 30 .......................................................................... 30
4.14.1 New Location Type WPC + Changeover Table 30 ............................................ 30
4.14.2 New Button on the GUI for Inserting/Removing Table ....................................... 30
4.15 WPC5 Support ................................................................................................... 31
4.15.1 Endurance Runs for Axes .................................................................................. 31