SIPLACE Station Software 7xx to 714 介绍 - 第44页
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition 44 CAUTION If this setting is not made th e component may be reject ed over the tray and the Z-axis may dash hard against the tray. On upgrading…
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
43
5.19 Setting Build Time on the GUI
There are several times describing the duration of the production process:
Cycle-Time: is a production line property that exposes the mean time in which a line accomplishes
boards.
Build-Time: Build time is the time it takes to assemble a specified board in a specified processing
area, including the first fiducial measurement, nozzle exchange and the last placement action.
In the "Statistics – Board performance" view the triggers for start time (first fiducial
measurement) and end time (last placement action) of the build time can be set via a button.
5.20 Enhanced SIPLACE Vision Functionality
The Vision system can now also recognize tape pockets in black blister tapes during the feeder
position recognition without having to teach the tape pockets before.
Until now, only tape pockets in white paper tapes could be recognized with the default settings.
Features (V704.02: Compatible Mode V703.03)
5.21 Settings for Manual Tray Carrier SX
If the manual tray Carrier SX is used, the insert frame with the fold-away tape guide channel is
required. For this, the operator has to make manual settings in the Auto-configuration under
Machine configuration on the Machine service activity level.
Figure 5-3: Settings for manual tray Carrier SX
The 60 slots (outer position, fold-away tape duct) entry has to be set for the table location.
Thus, the 27x27 reject bin and the left reject channel on the location are excluded from the
configuration.
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
44
CAUTION
If this setting is not made the component may be rejected over the tray and the Z-axis
may dash hard against the tray.
On upgrading from station software versions <=704 the settings in the Auto-configuration
have to be checked accordingly, if the manual tray Carrier SX is used.
5.22 Two-Row Nozzle Changer on SX1/SX2 for C&P20 and CPP
The two-row nozzle changer is supported for the C&P20 and CPP placement heads on the
SX1/SX2-series placement machines.
Features (V704.03: Compatible Mode to V705.04)
5.23 Flexible Usage of Feeder Types
As of this station software version some feeder types can be flexibly used without changing the
setup in SIPLACE Pro. After a feeder type change the machine can immediately start picking up
again.
The following feeder type pair is supported for flexible usage:
2x8mm X-feeder ↔ 8mm X-feeder
The Status display X-feeders topic has been completed accordingly in the online help of the
station software.
5.24 SST38 PCB Camera Replaced by SST30
The SST30 PCB camera now covers the entire functionality of the SST38 PCB camera. Thus, it is
possible to measure 01005 components without any restrictions with the SST30 PCB camera as of
this station software version.
Features (V704.03 SP1 and SP2: Compatible Modes to V705.04
SP1 and V705.04 SP2 resp.)
5.25 Improved Traveling Range Measurement
In this station software version the traveling range measurement has been improved. For this
reason you are advised to recalibrate the traveling ranges during installation of the station software.
Station Software 7xx to 714.0 (R20-2) / Feature Description 11/2020 Edition
45
6 Feature Description – Station Software V705.x
Features (V705.03)
6.1 DX-Series Placement Machines
The station software supports the new DX1/DX2 and DX4 placement machines. The features of the
705.03 station software version for the DX-series are listed in the sections 6.25 to 6.33.
6.2 PCB Barcode Recognition with PCB Camera
If the barcode is placed on the upper side of the board, it is possible to replace the Traceability
function of the barcode scanner with this function through measurements with the PCB camera.
Due to the travel possibilities of the PCB camera, this function can be used for further use cases as
well. The function has been implemented as follows:
– Barcode reading on boards with the PCB camera for Traceability. The following barcode types
can be read:
1D barcodes: Code 39, Code 93, Code 128, EAN 8, EAN 13
2D barcodes: Data Matrix ECC 200
– Barcode position and size coding in SIPLACE Pro.
– Via multiple measurements, it is possible to read barcodes that are bigger than the field of view
of the PCB camera.
– Teaching of barcodes at the station, data transfer to SIPLACE Pro.
– Definition of filters and the output layout in SIPLACE Vision Editor.
– Reading of barcodes on panels, transfer of the panel barcodes via the Trace service.
– Settings can be made in SIPLACE Pro in order to handle barcodes that cannot be read. If an
error occurs, it is possible to teach again at the station and repeat the measurement.
– Whispering of barcode data through the machine/line. This function requires a license for the
machine from the license server via SIPLACE Pro.
For licensing, this function requires an USB dongle at the machine, item no. [00519852-xx].