JO-116-001_w.pdf - 第19页
JO-1 16 Safe-10 4. Alert Indications in Instruction Manual 1 105-001 Alert Indications described as " CAUTION " Alert Description Related Items • At least two people are needed to install the feeder adjusting j…
JO-116
Safe-91105-001
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as "
WARNING
"
Alert Description Related Items
If you wear a pacemaker, do not handle the tape feeders.
The tape feeders use permanent magnets.
The pacemaker may be affected by the magnetism and a
serious accident will result.
Section 4
2. Feeder
Measurement
4. Alert Indications in Instruction Manual
Safety Precautions
JO-116
Safe-10
4. Alert Indications in Instruction Manual
1105-001
Alert Indications described as "
CAUTION
"
Alert Description Related Items
•
At least two people are needed to install the feeder adjusting
jig and the personal computer box.
The jig is very heavy. Be sure not to drop it. Otherwise, your
hands and/or feet will get hurt or the jig may be damaged.
•
Carefully handle the jig and the personal computer box to avoid
your nger being caught in the base.
Otherwise, you may receive a hand or foot injury.
Section 2
1. Procedure for
Jig Installation
•
The jig origin master is very heavy. Be sure not to drop it.
Otherwise, your feet will get hurt or the jig may be damaged.
•
The LED illumination unit uses a Cass 2 laser beam. Do not
expose your eyes directly the laser radiation. Otherwise, your
eyes will be injured.
Section 4
1. Registration of
Master Position
(Jig Origin
Adjustment)
•
Be sure not to drop any tape feeder. Otherwise, your feet will
get hurt or the feeder may be damaged.
Carefully handle each tape feeder and never drop any.
•
When you install a tape feeder on the adjustment base, avoid
getting your ngers caught between the end of the feeder and
the adjustment base and the connectors.
•
The master tapes are made of a thin metal. Carefully handle
the tapes to avoid cutting your nger with the tape edges.
Section 4
2. Feeder
Measurement
Safety Precautions
JO-116
Safe-111105-001
4. Alert Indications in Instruction Manual
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
Avoid getting your nger caught in the toggle clamp while
fastening the tape feeder to the jig.
Section 4
2. Feeder
Measurement
If you detach the tape feeder with the master tapes being
attached from jig, you may cut your nger with sharp edges of
the master tapes or damage the tapes by bending the master
tapes, etc.
Be sure to detach the master tapes rst, then the tape feeder
from the jig.
Section 4
2. Feeder
Measurement
The master tapes are made of a thin metal. Carefully handle the
tapes to avoid cutting your nger with the tape edges.
Section 4
2.3.2 Detachment
of Master
Tape(s)
Carefully handle the dial gauge because the tip of the probe is
very sharp. Your hand will get injured if the tip is inserted.
Section 4
3.2 Measuring
Method
Safety Precautions