JO-116-001_w.pdf - 第30页
1-1 JO-1 16 1. Outline This adjusting jig can be used to measure the pickup position and write the offset data in the memory of the feeder in order to maintain the accuracy and reliability of the feeder . 2. Specication…
1-B
JO-116
1105-001
1-1
JO-116
1. Outline
This adjusting jig can be used to measure the pickup position and write the
offset data in the memory of the feeder in order to maintain the accuracy and
reliability of the feeder.
2. Specications
Table A1-1
1. Model Name JG-0209E
2. Function This jig makes it possible to perform the following measurements and write the
offset data.
Measurement of Component Pickup Position and Writing of Offset Data
for Tape Feeders
•
Lane Origin Offset
(Lanes #1 and #2 for 8 mm Tape Feeder)
•
Offset Data X, Y, and Z
Notes
: (a) The master tape is required for the measurement of the X/Y
data.
(b) The following apparatuses are required for the measurement
of the Z data. These apparatuses are not included in this
feeder adjusting jig.
These apparatuses should be prepared in your company.
•
Block Gauge (104.0 mm)
•
Pry-Type Dial Gauge (0.01 mm)
•
Stand (used for the pry-type dial gauge)
•
Surface Plate (300 mm
×
300 mm or more)
3. Construction of
Device
•
Personal Computer for Data Writing
: DELL Optiplex Series (incl. Mouse and Keyboard)
(Operation System (OS) : Microsoft Windows 7)
•
Software for Data Writing
: Feeder Project Tester
•
Liquid Crystal Display
: DELL E Series
•
Pickup Position Camera
•
Pickup Position Camera Control Unit (Power Supply for LED Illumination)
: Analog Power Supply PSB-1012V-WW
•
Micrometer
•
Micrometer Unit (Measured Data Transfer Unit)
: Multiplexer MUX-10F
•
Electrical Box
: 220 V
±
10% AC
•
Measuring Jig
1. Outline
1105-001
1-2
JO-116
2. Specications
1105-001
Table A1-2
4. Applicable Feeder
Tape Feeders for GXH-1 Series
GT-08080, 08081, 08082
GT-12160
GT-24320
GT-44560
GD-08080, 08081, 08082
GD-12160
GD-24320
GD-44560
Tape Feeders for GXH-3 Series
GT-18080, 18081, 18082, 18083
GT-12161
GT-24321
GT-44561
GD-18080, 18081, 18082, 18083
GD-12161
GD-24321
GD-44561
Tape Feeders for SIGMA-G4/G5
GT-28080, 28081, 28082, 28083
GT-12162
GT-24322
GT-44562
GT-72002
GT-88002
GD-28080, 28081, 28082, 28083
GD-12162
GD-24322
GD-44562
(GD-72002)
(GD-88002)
5. Pickup Position
Camera
1/4-inch CCD 640
×
480 pixel (Monochrome)
View Size : Y=3.6 mm X=2.7 mm
Screen Size : Master Setting Window 1.2 times
Measurement Window 0.85 times
Camera Window 1.6 times
(Magnication:"640
×
480 pixel" regarded as "1")
6. Micrometer Unit Mu1tiplexer: MUX-10F
Set the rotary switch to "[6]" before use.