00198356-01_AI_Input-Extension_SX12_DE_EN_web - 第40页
40 Table Of Contents Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2 Option Input Conveyor Extension 05/2017 4.1.5 Replacing the Toothed Belt (Conveyor Belt) .. 68 4.1.6 Belt Tension .. 69 4.1.6.1 Setting…
39
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2
Option Input Conveyor Extension 05/2017
Table Of Contents
Table Of Contents
1 Introduction.. 41
1.1 Safety Instructions.. 41
1.1.1 Conventions for the Use of Safety Instructions and Symbols.. 41
1.1.2 Safety Instructions for Working with Strong Magnetic Fields.. 42
1.1.3 Safety Instructions for the Power Supply (Without SMPS).. 42
1.1.4 Safety Instructions for the Power Supply (With SMPS).. 43
1.1.5 Safety Instructions for the Gantry.. 45
1.1.6 Safety Instructions on Hazardous Materials.. 45
1.1.7 Classification of the Optical Systems.. 46
1.1.7.1 Classification of the Whole Machine.. 46
1.1.7.2 Laser Classification.. 46
1.1.7.3 Classification of the Camera Systems.. 46
1.2 Preparatory Work..... 46
1.3 Other Instructions.. 48
1.3.1 Environmentally-Friendly Disposal of Materials and Components.. 48
1.3.2 Use of Original SIPLACE Accessories and Spare Parts.. 48
1.3.3 ESD Guidelines.. 48
1.3.3.1 Definition of ESD.. 48
1.3.3.2 Important Measures to Protect Against Static Charging.. 48
1.3.3.3 Handling ESD Modules.. 49
1.3.3.4 Measurements and Modifications to ESD Modules.. 49
1.3.3.5 Dispatching ESD Modules.. 49
1.3.4 Validity of Document.. 49
1.3.5 Release History.. 50
1.4 Staff Qualifications and Training.. 50
2 Brief description.. 51
2.1 Product description.. 51
2.2 Prerequisites.. 51
2.3 Scope of Delivery.. 52
2.4 Tools and equipment required.. 53
2.5 Required Working Time.. 53
3 Installation.. 55
3.1 Preparing the machine.. 56
3.2 Dismantling any available belt guides.. 57
3.3 Preparing the extensions.. 58
3.4 Installing the belt guide extension.. 59
3.5 Mounting the hand guard belt extension.. 60
3.6 Setting the belt tension.. 62
4 Appendix.. 63
4.1 Excerpts from the Service Manual.. 63
4.1.1 Replacing the Hexagonal Shaft [03094006-xx].. 63
4.1.2 Replacing the Tape Drive [03092315-xx].. 64
4.1.3 Replacing the conveyor drive [03092345-xx].. 65
4.1.4 Replacing the clamping rail and belt guide.. 66
40
Table Of Contents Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2
Option Input Conveyor Extension 05/2017
4.1.5 Replacing the Toothed Belt (Conveyor Belt).. 68
4.1.6 Belt Tension.. 69
4.1.6.1 Setting the Tension of the Conveyor Toothed Belt.. 69
4.1.6.2 Calculating the Belt Tension.. 71
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2
Option Input Conveyor Extension 05/2017
1 Introduction
1.1 Safety Instructions
41
1 Introduction
This manual describes the installation of the "Input Conveyor Extension" option for SIPLACE®
SX1/SX2 V2 machines.
1.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the Use of Safety Instructions and Symbols
Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► These symbols indicate actions that have to be performed by the operator.