4OM-1011-002 - 第18页

Tg0860-PM-MM 0305-001 1-3 2.2 Preparation for Lubrication Same T ypes of Lubricants Equivalent for DAPHNE EPONEX GREASE No.1 (IDEMITSU KOSAN CO., L TD.) Equivalent for NEW MOL YNOC GREASE No.1 (Nippon Oil Corporation) Eq…

100%1 / 289
Tg0860-PM-MM
2. Preparation for Maintenance
2.1 Preparation for Cleaning
Prepare the cleaning tools.
• Brush
Use a brush whose bristles do not come off easily.
• Rag
Use a rag (such as cotton) which produces as little waste thread as possible.
A clean rag should also be prepared, depending on the spots to be cleaned.
• Oiled Rag
Use a rag (such as cotton) which produces as little waste thread as possible,
dampened with grease which is used for lubrication.
Note: Do not apply too much oil to the rag.
The oil should not be mixed with another type.
• Air Gun
Use the one on the market.
• Vacuum Cleaner
Use the one on the market.
Ref.: If the end of the suction mouth is narrowed, some spots can be cleaned
more easily.
• Air Blow for Camera
Use the one on the market.
• Vacuum Filter Replacement Jig
Use the standard accessory parts.
• Container, etc.
Use a container of such capacity that the water does not overflow when the
drain is cleaned.
2.2 Preparation for Lubrication
Prepare the specified grease and lubricating tools.
• The specified grease
(1) Refer to “Grease”.
• The specified lubricating tools
(2) Brush (3) Vinyl gloves (4) Grease applicator (5) Hand grease gun
Refer to “KH120”
(1) Grease
• DAPHNE EPONEX GREASE No.1
• NEW MOLYNOC GREASE No.1
• SILICONE GREASE KS64
2. Preparation for Maintenance
0305-001 1-2
Tg0860-PM-MM0305-001 1-3
2.2 Preparation for Lubrication
Same Types of Lubricants
Equivalent for DAPHNE EPONEX GREASE No.1 (IDEMITSU KOSAN CO.,
LTD.)
Equivalent for NEW MOLYNOC GREASE No.1 (Nippon Oil Corporation)
Equivalent for SILICONE GREASE KS64 (SHIN-ETSU CHEMICAL CO.)
(2) Brush
Use a brush whose bristles do not come off easily.
(3) Application by Hand
Use a pair of vinyl gloves to apply grease by hand.
(4) Grease Applicator
Use a normal grease applicator on the market.
Table 4A2
Table 4A1
Table 4A3
Tg0860-PM-MM0305-001 1-4
2.2 Preparation for Lubrication
(5) Hand Grease Gun
Standard : KH-120
Part No. : 630 062 2577
Maker : Yamada Yuki
Note: Do not use the hand grease gun except for supplying DAPHNE
EPONEX GREASE No. 1.
If a hand grease gun and attachment are required, purchase them.
Consult our sales personnel for details.
Refer to the attached instruction manual for the detailed information on
how to use these grease.
Fig. 4A3
N Type
P Type
H Type
U Type
SPK-3C
Standard Shape
Grease and Required Number
of Attachments
For DAPHNE
EPONEX
GREASE No.1
Total
Frequency
in Use
Part No. Remarks
1
1
1
1
1
1
1
1
1
1
630 061 7467
630 061 7474
630 061 7450
630 061 7443
630 061 7504
THK
THK
THK
THK
Yamada
Yuki
Table 4A4 Attachment for Hand Grease Gun KH-120