4OM-1011-002 - 第236页

Tg0860-PM-MM 8.1 INPUT CHECK Display 0305-001 3-185 8.1.5 FEEDER UNIT SET-UP INFORMA TION Display • Displayed are the names of the feeders installed on the feeder base units # 1 through # 4. When the [FEEDER UNIT SET-UP …

Tg0860-PM-MM

8.1 INPUT CHECK Display

0305-001 3-184

Table 4C14

Stick Feeder Setting of SDS Nodes for Feeder Base R (A) (Option)

Table 4C15

Stick Feeder Setting of SDS Nodes for Feeder Base L (A) (Option)

Table 4C16

Stick Feeder Setting of SDS Nodes for Feeder Base R (B) (Option)

Table 4C17

Stick Feeder Setting of SDS Nodes for Feeder Base L (B) (Option)

Tg0860-PM-MM

8.1 INPUT CHECK Display

0305-001 3-185

8.1.5 FEEDER UNIT SET-UP INFORMATION Display

• Displayed are the names of the feeders installed on the feeder base units #1

through #4.

When the [FEEDER UNIT SET-UP INFO.] key is pressed at the “INPUT

CHECK” display, the following display appears on the screen.

Note: When the connection of the unit is changed after this display is opened,

be sure to press the [READ UNIT CONN. INFO.] key. Otherwise, the

correct device information will not be displayed.

*1 Indicated are what types of feeders are connected with which connectors.

*2 [READ UNIT CONN. INFO.] Key

This key is used to update the feeder unit set-up information.

Fig. 4C335

0305-001 Tg0860-PM-MM

8.2 MACHINE PROGRAM INFORMATION Display

When the [MACHINE PROGRAM INFORMATION] key is pressed at the

“DEVICE CHECK” display, the following display appears on the screen.

Note: The -marked item is optional.

• Software versions of the machine control system are displayed in A-marked

text boxes.

CPU BOARD #1 : Version of Software which controls the op-

eration system.

CPU BOARD #2 : Version of Software which controls the me-

chanical system.

CPU BOARD #3 : Version of Software which controls the multi-

layer tray feeder.

RECOGNITION BOARD : Software Version for Recognition System

SOFTWARE SW #1, #2 : Version of ROM Switches for Distinction of

Options

RECOG COMM. TO HOST: Software Version for Communication be-

tween Recognition and Host Computer

CPU2 COMM. TO RECOG: Software Version for Communication be-

tween Control and Recognition

GEM : Software Version of GEM System (Option)

• Software versions of the placement heads (ZA1, ZA2, ZB1, ZB2 axis) are

displayed in the B-marked text boxes.

S-VERSION : Version of Software for Head Motor Drivers

W-VERSION : Version of Waveforms for Head Motor Drivers

Note: “----” appears in the text box for a head where a communication error

has occurred during version reading.

• Software versions of the SDS (Serial I/O Interface) P.C.B. are displayed in

the C-marked text boxes.

VERSION : Main Version

REVISION : Minor Version (Minute Correction Record No.)

8.2 MACHINE PROGRAM INFORMATION Display

3-186



Fig. 4C336