4OM-1011-002 - 第26页
0305-001 Tg0860-PM-MM 5. Weekly Maintenance 1-1 1 Component Pick-Up Position of T ape Feeder Cleaning Remove adhering dirt, etc., with a brush whenever necessary . Fig. 4A16 Component Supply Section (Feeder) Beam A Side …
0305-001 Tg0860-PM-MM
5. Weekly Maintenance
1-10
Fig. 4A15 PCB Positioning Section
Upper Surface of Fiducial Mark
Cleaning
Remove dirt and dust using a rag.
Component Discharge Box
Abandonment
Remove the components accumu-
lated in the box.
Protective Glass of the Compo-
nent Recognition Camera
Cleaning
Drop dirt and dust into the compo-
nent discharge box using the air blow
for the camera. If the protective glass
is dirty with grease, remove it using
a rag.
Fig. 4A14 Component Recognition Section
Beam A Side
Beam B Side
Beam A Side
Beam B Side
PCB Positioning Section
Cleaning
Clean dirt and dust on the upper sur-
face of the PCB backup table using a
vacuum cleaner.
0305-001 Tg0860-PM-MM
5. Weekly Maintenance
1-11
Component Pick-Up Position of
Tape Feeder
Cleaning
Remove adhering dirt, etc., with a
brush whenever necessary.
Fig. 4A16 Component Supply Section (Feeder)
Beam A Side
Beam B Side
0305-001 Tg0860-PM-MM
1-12
Table 4A7
6. Monthly Maintenance
Note: Grease Symbols
DE1 : DAPHNE EPONEX GREASE No.1
NM1 : NEW MOLYNOC GREASE No.1
6. Monthly Maintenance
Maintenance Spots Check
Name
Fig.
No.
Description Grease
Cleaning
Tools,
Nozzles, etc.
Teaching Plate
Section
Teaching Plate
(Component
Recognition Offset
Jig), Position of
Teaching Plate, Back
Light Stage
4A17 Checking and
Cleaning
− − − Air Blow for
Camera
Nozzle Stocker Cam Follower 4A18 Cleaning and
Lubrication
− − − Oiled Rag,
NM1, Brush
Nozzle Storage
Section
4A18 Cleaning − − − Rag
Inside of Vacuum
Nozzle
4A19 Cleaning − − − Air Gun
Hole of Vacuum
Nozzle
4A19 Cleaning − − − Air Gun
Vacuum Nozzle End 4A19 Cleaning − − − Rag
Placement Head Vacuum Filter 4A20 Checking − − − Vacuum
Filter,
Replacement
Jig