4OM-1011-002 - 第261页
Tg0860-PM-MM 10.7 HDD/FDD OPERA TION - RECALL MESSAGES Display 0305-001 3-209 10.7 HDD/FDD OPERA TION - RECALL MESSAGES Display When the [RECALL MESSAGES] key is pressed at the “HDD/FDD OPERA- TION” display , the followi…
Tg0860-PM-MM
10.6 HDD/FDD OPERATION - NOZZLE TYPE DATA INFO. Display
0305-001 3-208
Load Operation (FD
→→
→→
→
Machine)
(1) Insert a floppy disk (a disk where the nozzle type data is saved) into
the FDD (floppy disk drive).
(2) Press the [FD] key. The nozzle type names are displayed.
Note: Data other than the nozzle type is not displayed.
(3) Move the line cursor on the “FD” side to the nozzle type data name to
be loaded.
(4) When the nozzle type data having the same name is found in the ma-
chine, whether or not the exiting data should be replaced with the
new one is to be selected. (Select it by pressing the [OVERWRITE
DATA] key and changing the indication).
(5) Press the [LOAD ] key.
“LOADING” appears in the “STATUS” text box, indicating that the
data is being loaded.
• When the data is loaded normally, “LOADED” appears in the text
box and the loaded nozzle type name appears on the machine side.
• When an error is found during load operation, an error message is
issued and the load operation is interrupted.
Notes: (a) When the loaded pattern progrma data contains some
component IDs which do not exist in the component li-
brary data on the machine side, it is required to load such
IDs from the programming device.
(b) Pattern Program Memory Capacity
Maximum Number of Steps: 5,000 steps/model
Maximum Memorized Number of Steps: 7,600 steps
Maximum Memorized Number of Models: 24 models
How to Delete the Nozzle Type Data on “FD” Side
(1) Insert a floppy disk into FDD.
(2) Press the [FD] key. The nozzle type names are displayed.
(3) Move the line cursor (“FD” side) to the nozzle type name to be de-
leted and press the [PRGM. DEL.] key.
The [DELETE] key appears at A in Fig. 4C356.
(4) When the [DELETE] key is pressed, the delete operation starts.
After the delete operation is completed, the nozzle type names in the
floppy disk are displayed again.
• Data other than the nozzle type is not displayed.
• When an unformatted floppy disk is inserted into FDD and the
save operation is performed, an error message is issued.
Fig. 4C356
A
Tg0860-PM-MM
10.7 HDD/FDD OPERATION - RECALL MESSAGES Display
0305-001 3-209
10.7 HDD/FDD OPERATION - RECALL MESSAGES
Display
When the [RECALL MESSAGES] key is pressed at the “HDD/FDD OPERA-
TION” display, the following display appears on the screen.
Notes: (a) This display can be opened only when the machine is in the
“STOP” mode and the recalled data (recalled messages) is not
exchanged between the machine and the programming device
(option).
(b) While this display is active, the recalled data (recalled messages)
cannot be exchanged between the machine and the programming
device.
The [ZERO] and [READY] buttons also become invalid.
Refer to “10.3 HDD/FDD OPERATION - OFFSET DATA Display of Section
3” for the detailed information on how to save or delete the recalled data (re-
called messages).
Fig. 4C357
Tg0860-PM-MM
10.8 HDD/FDD OPERATION - COMPONENT LIBRARY (ALL) Display
0307-002 3-210
10.8 HDD/FDD OPERATION - COMPONENT LIBRARY
(ALL) Display
When the [COMP. LIBRARY DATA (ALL)] key is pressed at the “HDD/
FDD OPERATION” display, the following display appears on the screen.
Notes: (a) This display can be opened only when the machine is in the
“STOP” mode and the component library data is not exchanged
between the machine and the programming device (option).
(b) While this display is active, the component library data cannot be
exchanged between the machine and the programming device.
The [ZERO] and [READY] buttons also become invalid.
(c) During saving and reading, this display cannot be changed to oth-
ers.
Refer to “10.3 HDD/FDD OPERATION - OFFSET DATA Display of Section
3” for the detailed information on how to save, load, or delete the component
library data.
Fig. 4C358