4OM-1011-002 - 第44页

0305-001 Tg0860-PM-MM Section 2 Parts Replacement and Maintenance 2 - A This section explains the component replacement and main- tenance, etc.

0305-001 Tg0860-PM-MM

1-28

10. Lubrication Procedure

10.1 Placement Head and P.C.B. Positioning Section

It is recommended to work with the following procedure.

Conditions before the Work

• All nozzles have been housed in the nozzle stockers.

• The conveyor width has been zeroed.

• The backup up/down axis is in the locate position.

• The head is at the center of the P.C.B. positioning section.

Beam A

X-Axis: Approx. +200 mm (+80000P)

Y-Axis: Approx. +300 mm (+120000P)

Beam B

X-Axis: Approx. -200 mm (-80000P)

Y-Axis: Approx. +300 mm (+120000P)

• The head has been lowered so that the grease nipple can beseen.

Up/Down Axis (Head 1 and Head 2): 35 mm (14000P)

• The power and air sources have been turned off and padlocked.

Operation Procedure

(1) Apply an appropriate amount of DAPHNE EPONEX GREASE No.1 from

the grease nipple on each of the placement heads (Head 1 and Head 2).

Use U type and N type attachments.

(2) Apply appropriate amount of DAPHNE EPONEX GREASE No.1 on the

ball spline on the P.C.B. positioning section from the grease nipple.

Use SPK-3C attachment.

10.2 Traverse Clamp Section

It is recommended to work with the following procedure.

Conditions before the Work

• The main machine and the multi-layer tray feeder (option) have been all

zeroed.

• The power and air sources have been turned off and padlocked.

Operation Procedure

(1) Open the maintenance cover on the side of beam A.

(2) Pull the belt and draw out the L and R clamp sections of the multi-layer

tray feeder.

(3) Apply appropriate amount of DAPHNE EPONEX GREASE No.1 from

the grease nipple.

Use N type and U type attachments.

(4) Apply DAPHNE EPONEX GREASE No.1 on the small linear guide and

cam follower with your hand or a brush.

10. Lubrication Procedure

0305-001 Tg0860-PM-MM

Section 2

Parts Replacement and

Maintenance

2-A

This section explains the component replacement and main-

tenance, etc.

0305-001 Tg0860-PM-MM2-B