00197475-01_IM_Traceability3.6_EN - 第12页
Installation Traceability Installing Traceability on the Station Computer 12 Installation Manual SIPLACE Traceability 3.6 Fill Level Control (2) Traceability ► If the filling level correction should be allowed, acti - va…
Installation Traceability
Installing Traceability on the Station Computer
Installation Manual SIPLACE Traceability 3.6 11
Configuration of the Splice Detection
Fill Level Control (1)
► The station software version 407.05 and 505.05 of-
fers two different interfaces to the Setup verification
system. By choosing the corresponding Setup verifi-
cation system the interface will be configured in the
station-software accordingly.
► Click Next to continue.
NOTICE
X Machines
This dialog will not appear for X series machines since the splice interface is always integrated
into the X feeders.
► Select the checkbox Splice detection existing, if
splice detection is available.
► Enter the COM Port where Splice detection is
plugged in.
► Click Next to continue.
► If the fill level control should be disabled for single
tracks, activate the checkbox "Running tracks" empty
is allowed. After that you can let single tracks go emp-
ty consciously.
► Click Next to continue.
Installation Traceability
Installing Traceability on the Station Computer
12 Installation Manual SIPLACE Traceability 3.6
Fill Level Control (2)
Traceability
► If the filling level correction should be allowed, acti-
vate the checkbox Operator may correct the filling
level. After that the operator may correct the filling
level. Otherwise only the user with the right "LineEn-
gineer" and higher can correct the filling level.
► Click Next to continue.
► Here you can choose whether the Traceability data
should be generated.
► Furthermore you can select the File version 1.0 for
standard Traceability file or the File version 2.0 for ex-
tended Traceability file.
► Click Next to continue. Wait until the next dialog box
appears. It can take a few minutes.
NOTICE
File version 2.0
To get the full information we recommend using the File version 2.0.
Installation Traceability
Installing Traceability on the Station Computer
Installation Manual SIPLACE Traceability 3.6 13
Overview of the settings
Finishing the installation
► Here you can see the overview of the settings.
► Click Back to review or change the settings.
► Click Next to continue the installation.
► Click Finish to finish the installation