Operating Manual - 第33页

4022 591 960 62 Operating Manual 02.0 2 FCM Mu ltif lex 31 Current Pr ogram Selection CHAPTER 6 Curr ent Pr ogr am Selection In case of an error , call for assistance. 6.1 General 1. Prin t th e set-up list (o ut o f pr …

100%1 / 80
4022 591 96062 Operating Manual
02.02 FCM Multiflex 30
Pre Start Inspections
3.
FIGURE 49
CAUTION
NEVER USE COMPRESSED AIR FOR CLEANING. (WASTE WOULD BE
BLOWN INTO FINE MECHANICAL PARTS, CAUSING DAMAGE AND
MALFUNCTIONING OF THE FCM.)
4022 591 96062 Operating Manual
02.02 FCM Multiflex 31
Current Program Selection
CHAPTER 6 Current Program Selection
In case of an error, call for assistance.
6.1 General
1. Print the set-up list (out of production preparation software of SVS
Pro)and use it to:
- Check boards.
- Check components, feeder type and location (see 6.2 when SVS Pro is
used).
- Check nozzles (see 6.3 when SVS Pro is used).
6.2 Check components, feeder type and location
with SVS Pro
1. Scan the barcode ‘Rescan partnumbers’ (also recommended after shift-
change).
FIGURE 50
RESCAN PART
NUMBERS
PARDATA
CHANGING
B
A
T
T
. F
U
L
L
4022 591 96062 Operating Manual
02.02 FCM Multiflex 32
Current Program Selection
2. Follow instructions.
FIGURE 51
6.3 Check Nozzles
FIGURE 52