DEK INFINITY USER MANUAL - 第142页
INFINITY 6(735()(5(1 &(6 35()(5(1&(6 2.16 User Manual Software Versi on 7 Display T ype Sets the type of status page displayed on the monitor , options are: Fiducial Monitori ng This paramete r enables and disab…
INFINITY
6(735()(5(1&(6
35()(5(1&(6
Software Version 7 User Manual 2.15
Tooling Monitoring This parameter sets, while Feature Licensing asserts that use of Tooling Devia-
tion Monitoring is authorized, the frequency (in boards printed) at which moni-
toring is performed. Monitoring is also carried out on the first print stroke of a
print run.
This feature only applies while squeegees are fitted.
When a particular print stroke is being monitored, as the squeegee traverses the
image the pressure being applied is measured and recorded. Any variations in
the load being applied, as a result of insufficient tooling support or underside
components coming into contact with the tooling are noted. Upon completion
of the print stroke, the deviation in the pressure applied over the print stroke is
determined and expressed as the tooling deviation. The tooling deviation is
calculated from the minimum and maximum values and expressed as a percent-
age. If the tooling deviation exceeds the permitted threshold, as set by the
Tooling Deviation parameter in the product file, a cyclic log text file called
deviate.dat is written and the following window is displayed:
NOTE
The number of samples is the amount of pressure variations recorded during the
print stroke.
The following menu bar is displayed:
On selecting Continue printing proceeds until it is interrupted by some other
cause.
On selecting Abort printing is discontinued and the following menu bar is
displayed, to enable the board to be removed from the machine:
If the number of samples (pressure variations) during a print stroke is less than
2 or the minimum value is zero, the error message ‘Failed to determine Tooling
Deviation’ is displayed.
Minimum Maximum Increment Default
0 Boards
(Tooling Monitor Disabled)
200 Boards 1 0 Boards
Excessive Tooling Deviation
Tooling Deviation : 25.08 %
Number of Samples : 81
Check the Board Support.
Continue Abort
Auto
Board
Manual
Board
Exit
INFINITY
6(735()(5(1&(6
35()(5(1&(6
2.16 User Manual Software Version 7
Display Type Sets the type of status page displayed on the monitor, options are:
Fiducial
Monitoring
This parameter enables and disables the intelligent fiducial monitoring feature,
options are:
If smart is selected, a set levels menu bar option is available.
On pressing the Set Levels key, a window opens as follows:
The Next and Previous keys move the cursor between the three parameters.
The Incr. and Decr. keys increase and decrease the value of the top two
parameters and turn the Automatic Retry On and Off.
The Exit key closes the window and returns to the set preferences window.
The range of values for the three parameters are as follows:
Score Warning
Level
During fiducial set up the score achieved after training each fiducial is analyzed.
If the score fails to achieve the accept score by more than Score Warning Level,
an instruction box appears recommending the operator check video settings,
fiducial parameters etc.
Options Default
Type 1 Type 1
Type 2
Options Default
Smart Normal
Normal
Set
Levels
Next Previous Incr. Decr. Exit
Score Warning Level
Min: 0
Max: 500
Var’n Warning Level
Min: 0
Max: 500
Automatic Retry
OFF
ON
SMART FIDUCIAL MONITORING
SCORE WARNING LEVEL
VAR'N WARNING LEVEL
AUTOMATIC RETRY
50
10
OFF
INFINITY
6(735()(5(1&(6
35()(5(1&(6
Software Version 7 User Manual 2.17
Var ’n Warning
Level
While the machine is running, the score for every fiducial located is monitored.
If for a given fiducial, the score from one fiducial to the next varies by more than
the Variation Warning Level, but does not fall below the minimum accept score,
a message window is displayed, warning that the score of the screen/board
fiducial is fluctuating. Fiducial relearning is advised if the problem persists.
Fiducial Search The parameter enables an auto search to be selected if a screen fiducial or board
fiducial are not found. The feature also enables a machine to run a product setup
on another machine, options are:
Setup If Custom is selected, an Adjust option becomes available on the menu bar:
On selecting Adjust from the menu, a Fiducial Search Strategy window opens:
The menu bar changes to:
The Next and Previous keys move the cursor between the two parameters.
The Incr. and Decr. keys change the value of the highlighted parameter.
The Exit key returns to the set preferences menu.
Autosearch This parameter sets whether an automatic search can be selected following a
Fiducial Not Found Error Message. The options are:
The option Auto Search (F2) is added to the menu bar as follows:
Options Default
Custom Disabled
Disabled
Adjust Next Previous Incr. Decr. Exit
Fiducial Search Strategy
mm
AUTOSEARCH
WINDOW SIZE
All Boards
16
Next Previous Incr. Decr. Exit
Options
1st Board
All Boards
Retry
Auto
Search
Fiducial
Setup
Search
Step
Search
Reset
Abort