DEK INFINITY USER MANUAL - 第264页

INFINIT Y ',163(&7,21 ',163(&7,21 6(78 3 8.24 User Manual Software Versi on 7 4. Enter limit set options using Next, Pr evious, Incr . and De cr . ke ys. 5. Select Exit . 6. Select Save Limits . Th…

INFINITY

',163(&7,21

',163(&7,216(783

Software Version 7 User Manual 8.23

Edit Limits 1. Select Edit Limits.

The following window is displayed:

2. Enter parameters using the Next, Previous, Incr. and Decr. keys. A coarse

set of values is shown above

3. Select Limit Options.

These are usually set to enabled. If for any reason a particular inspection is

not required, set to disabled. If any global limit set options are disabled the

corresponding parameters are greyed out. These are limit set options,

therefore they are only active for this particular limit set. If a particular

inspection is not required for the whole product, this can be achieved in

global limit options, under edit globals, earlier in this chapter.

If either blockage or paste is set to disabled, volume is also disabled. Once

volume is disabled by this method it is not automatically enabled should both

blockage and paste be re-enabled. Volume must be selected and set to

enabled.

Add

Limits

Edit

Limits

Limit

Exit

EditLimitParameters

LimitSetID

BlockageWarning

BlockageAlarm

SmearWarning

SmearAlarm

PasteWarning

PasteAlarm

AlignWarning

AlignAlarm

BridgeWarning

BridgeAlarm

VolumeWarning

VolumeAlarm

COARSE

1.00 sq mm

1.50 sq mm

0.200mm

0.250mm

0.015mm

0.010mm

Limit

Options

Save

Limits

Next Previous Incr. Decr. Exit

Limit

Options

Save

Limits

Next Previous Incr. Decr. Exit

Enabled

Blockage

Smear

Paste

Alignment

Bridging

Volume

Site Limit Set Options

INFINIT

',163(&7,21

',163(&7,216(783

8.24 User Manual Software Version 7

4. Enter limit set options using Next, Previous, Incr. and Decr. keys.

5. Select Exit.

6. Select Save Limits. The message ‘Saving Fiducial Data - Please Wait

Board data file saved’ is displayed.

7. Select Exit.

8. Select Exit.

Selecting an

Existing Site

To edit an existing site carry out one of the following procedures:

• Using the mouse left button or touchscreen (if available) select the position

of the site on the representation of the board.

• Using the mouse left button or touchscreen (if available) select the site (or

device) name on the devices and site list.

• Use the Next / Previous buttons on the menu bar.

When an existing site is selected the following GUI display information is

updated:

• Site parameter information.

• Site X and Y coordinates.

• Vision panel camera display image of new site.

Next Previous Incr. Decr. Exit

Limit

Options

Save

Limits

Next Previous Incr. Decr. Exit

Limit

Options

Save

Limits

Next Previous Incr. Decr. Exit

Add

Limits

Edit

Limits

Limit

Exit

INFINITY

',163(&7,21

',163(&7,216(783

Software Version 7 User Manual 8.25

How to Add a Site The following procedure details a typical example of creating a new site with

the GUI board representation displaying the default standard board size format.

NOTE

It may be an advantage to have a board at hand in order to roughly estimate

required site locations.

1. Roughly position the camera to a desired site using either the mouse controls

or touchscreen (if available). Click on the desired area of the monitor board

representation.

2. A camera icon appears at the area selected. The machine camera moves to

the selected area (and board and stencil features are displayed in the vision

window). X and Y coordinates of the position is displayed.

3. To position the camera more accurately to the required inspection site, adjust

the X and Y screen bars displayed in the vision window.

4. Select Add Site.

The site name is automatically appended to a default name, ie SITE001.

If an existing site is selected the menu bar also includes Delete, Edit and

Inspect site function buttons.

NOTE

The operator can rename the new site as required by selecting Incr. or Decr.

and using the keyboard. Press Enter on completion.

Edit

Global

Edit

Limits

Add

Site

Exit