DEK INFINITY USER MANUAL - 第302页

INFINITY &21680$ %/(5(3/ (1,6+0(1 76 %/8(81'(5 6&5(( 1&/($1 (5 9.18 User Manual Software Versi on 7 1 1. Press Exi t (F8). Paper an d Solv ent Repleni shment Paper and solvent replenishment can take p…

100%1 / 356
INFINITY
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
Software Version 7 User Manual 9.17
3. Using the Next and Previous keys (F4 - F5) highlight the Screen Clean Rate.
4. Using the Incr. and Decr. keys (F6 -F7) set the Screen Clean Rate. This can
be set at any number between 0 and 200 in increments of 1.
5. Use the Previous key (F5) to highlight the Screen Clean Mode. This
parameter determines the mode of operation of the screen cleaner.
6. Press the Incr. or Decr. keys (F6 - F7) to enter the Screen Clean Mode.
The Screen Clean Mode window is opened:
7. Use the Left and Right keys (F2 - F3) to highlight the next sweep number
to be changed.
8. Use the Incr. and Decr. keys (F6 - F7) to select the operation required for the
highlighted sweep. The four options are: VAC, DRY, WET and NONE.
9. If the six stage sequence is setup as required, go to the next step, otherwise
return to Step 7.
10.Press Exit (F8).
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Screen Clean Mode 1
1
WET
2
DRY
3
DRY
4
NONE
5
NONE
6
NONE
Sweep Number
Left Right Incr. Decr. Exit
Left Right Incr. Decr. Exit
Left Right Incr. Decr. Exit
INFINITY
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
9.18 User Manual Software Version 7
11. Press Exit (F8).
Paper and Solvent
Replenishment
Paper and solvent replenishment can take place with the cleaner unit in the
printer. When paper or solvent needs replenishment a warning window is
automatically displayed on the monitor. The warning window varies, depending
on the setting of the consumable action option in set preferences. The message
in the warning window depends on whether the solvent or paper or both require
replenishment. The procedure varies, depending on whether the replenishment
is prior to a print run or during a print run.
Replenishment Prior to a Print Run:
If the set preference is set to warn, continue with Step 1. If the set preference is
set to pause or suspend go to Step 4.
1. If the set preference is set to warn, the tricoloured beacon shows amber/green
and the following window is displayed:
2. Select Confirm (F1).
3. Go to Step 17.
4. If the set preference is set to pause, the tricoloured beacon shows red and the
following window and menu bar is displayed:
If the set preference is set to suspend, the tricoloured beacon shows red and
the following window and menu bar is displayed:
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Warning
Cleaner paper Low. Please replace.
Confirm
Pause on Warning
Cleaner Solvent Low. Please refill.
Cancel
Suspend on Warning
Cleaner Solvent Low. Please refill.
Cancel
INFINITY
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
Software Version 7 User Manual 9.19
5. Select Cancel (F8).
6. Go to Step 17.
Replenishment During a Print Run:
If the set preference is set to warn, continue with Step 7. If the set preference
is set to pause go to Step 11. If the set preference is set to suspend go to Step
15.
7. If the set preference is set to warn, the tricoloured beacon shows amber/green
and the following window is displayed:
8. Select Confirm (F1).
9. Select End Run (F1).
10.Go to Step 17.
11. If the set preference is set to pause, the tricoloured beacon shows red and the
following window is displayed:
12.Select Defer (F8). The print run continues.
13.Select End Run (F1).
14.Go to Step 17.
Cancel
Warning
Cleaner paper Low. Please replace.
Confirm
End
Run
Stop
Cycle
Paste
Load
Clean
Screen
Adjust
Knead
Paste
Pause on Warning
Cleaner Solvent Low. Please refill.
Defer
End
Run
Stop
Cycle
Paste
Load
Clean
Screen
Adjust
Knead
Paste