DEK INFINITY USER MANUAL - 第31页
INFINITY 0$&+,1 (352*5 $00,1* 67$*($ 0 $*1(7,& 3,//$56722/,1 * Soft ware Ver sion 7 User Manual 1.29 4. Fit the head prop. 5. Press Confirm (F1). 6. Select Board Clamps (F3) to open the clamps. 7. Slide a…
INFINITY
0$&+,1(352*5$00,1*
67$*($0$*1(7,&3,//$56722/,1*
1.28 User Manual Software Version 7
6. Select Exit (F8).
Magnetic Pillars
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN WORKING IN
THE TOOLING AREA OF THE MACHINE TO AVOID INJURY. THE FOILS ON THE
FRONT AND REAR BOARD CLAMPS ARE VERY SHARP.
CAUTION
BOARD CLAMPS. Care must be taken to ensure that the board clamps
are not damaged when removing or replacing tooling.
1. Select Board Stop (F4). The camera moves to the board stop position. The
board stop on the camera extends.
2. Select Raise Head (F2).
3. Raise the printhead using two button control.
The following window and menu bar is displayed:
Save Next Previous Incr. Decr. Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Adjust
Raise
Head
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
Hazardous Operation
The head must be propped while it is
raised
Insert the Head Prop.
Confirm
Lower
Head
INFINITY
0$&+,1(352*5$00,1*
67$*($0$*1(7,&3,//$56722/,1*
Software Version 7 User Manual 1.29
4. Fit the head prop.
5. Press Confirm (F1).
6. Select Board Clamps (F3) to open the clamps.
7. Slide a board along the rails to abut the board stop.
8. Select Board Clamps (F3) to close the clamps.
Confirm
Lower
Head
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop
INFINITY
0$&+,1(352*5$00,1*
67$*($0$*1(7,&3,//$56722/,1*
1.30 User Manual Software Version 7
9. Position the outermost support pins on the rising table under the board.
10.Select Board Clamps (F3) to open the clamps.
11. Remove the board and select Board Clamps (F3) to close the clamps.
12.Complete the positioning of the support pins.
13.Select Board Clamps (F3) to open the clamps.
14.Slide the board back along the rails to abut the board stop.
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop