DEK INFINITY USER MANUAL - 第310页
INFINITY &21680$ %/(5(3/ (1,6+0(1 76 %/8(81'(5 6&5(( 1&/($1 (5 9.26 User Manual Software Versi on 7 12. Feed the cleaner paper across the body assembly , ensuring the cleaner paper is aligned parallel…
INFINITY
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
Software Version 7 User Manual 9.25
9. Rotate the paper roll shaft until the groove is at 45° to the horizontal, facing
towards the top rear printhead cover of the machine.
10.Refit the paper spindles to both ends of the new paper roll. Ensure both faces
of the new paper roll are flush.
11. Install the new clean paper roll at the front of the unit, ensure the paper is
routed from underneath the roll towards the rear of the unit.
INFINITY
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
9.26 User Manual Software Version 7
12.Feed the cleaner paper across the body assembly, ensuring the cleaner paper
is aligned parallel to the unit end plate.
13.Insert the paper roll rod into the right hand flange of the shaft. Lay the rod
along the shafts groove trapping the cleaner paper between the shaft and rod.
14.Rotate the end of the flange of the rod towards the rear of the machine to lock
the rod onto the shaft.
INFINITY
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
Software Version 7 User Manual 9.27
15.Rotate the take up roll one complete revolutions against the motor clutch to
tension the cleaner paper across the cleaner squeegee assembly.
16.Ensure the cleaner paper has been routed correctly, from underneath the
paper roll (1) rearwards across the squeegee assembly and threaded between
paper rod and shaft (2).
17.Press Prime Paper (F5). The message ‘Press the two control buttons to
feed paper’ is displayed.
18.Press Lower Head (F2).
19.Remove the head prop.
20.Select Confirm (F1).
21.Lower the printhead using two button control.
22.Close the printhead cover.
23.Press the System button.
1
2
Lower
Head
Board
Clamps
Prime
Paper
Prime
Solvent
Exit
Lower
Head
Board
Clamps
Prime
Paper
Prime
Solvent
Exit
Confirm Cancel