DEK INFINITY USER MANUAL - 第50页
INFINITY 0$&+,1( 352*5$ 00,1* 67$*(' 0 8/7,)/(;722/,1 * 1.48 User Manual Software Versi on 7 1 1. Press Confirm (F1). 12. The MultiFlex tooling can now be fitted into the a ppropriate location holes in th…
INFINITY
0$&+,1(352*5$00,1*
67$*('08/7,)/(;722/,1*
Software Version 7 User Manual 1.47
6. Select Change Tooling (F6).
7. Select Full Width (F5). The message ‘Checking for a board on the belts’
is displayed. Whilst the rear rail is moving the following message ‘Rail
moving...’ is displayed.
8. Select Raise Head (F2).
9. Raise the printhead using two button control.
The following window and menu bar is displayed:
10.Fit the head prop.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
language
Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Board
Width
Load
Width
Print
Height
Exit
Hazardous Operation
The head must be propped while it is
raised
Insert the Head Prop.
Confirm
Lower
Head
INFINITY
0$&+,1(352*5$00,1*
67$*('08/7,)/(;722/,1*
1.48 User Manual Software Version 7
11. Press Confirm (F1).
12.The MultiFlex tooling can now be fitted into the appropriate location holes
in the tooling plate. Ensure that the tooling is placed into the correct set of
holes, taking regard of the type of screen being used and hence the position
of the fixed rail.
13.Select Lower Head (F2).
The following window and menu bar is displayed:
14.Remove the Head Prop.
Confirm
Lower
Head
Adjust
Lower
Head
Board
Clamps
Set
Stop
Hazardous Operation
The head is about to be lowered
Remove the Head Prop and confirm that
everyone is standing clear.
Confirm Cancel
INFINITY
0$&+,1(352*5$00,1*
67$*('08/7,)/(;722/,1*
Software Version 7 User Manual 1.49
15.Select Confirm (F1).
16.Lower the printhead using two button control.
17.Close the front printhead cover.
18.Press the System button.
19.Select Board Width (F5).
20.Select Board Stop (F4). The camera moves to the board stop position. The
board stop on the camera extends.
21.Select Raise Head (F2).
22.Raise the printhead using two button control.
23.Fit the head prop.
24.Press Confirm (F1).
25.Select Board Clamps (F3) to open the clamps.
26.Slide a board along the rails to abut the board stop.
27.Select Board Clamps (F3) to close the clamps.
28.Select Lower Head (F2).
29.Remove the Head Prop.
Confirm Cancel
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Board
Width
Load
Width
Print
Height
Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Adjust
Raise
Head
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
Confirm
Lower
Head
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop