DEK INFINITY USER MANUAL - 第63页
INFINITY 0$&+,1 (352*5 $00,1* 67$*() $872 )/(;722/,1* Soft ware Ver sion 7 User Manual 1.61 9. Select Exit (F8). 10. Se lect Exi t (F8). The rail moves to the board width and the selected Autofle x pins rise. …
INFINITY
0$&+,1(352*5$00,1*
67$*()$872)/(;722/,1*
1.60 User Manual Software Version 7
The Autoflex Matrix window is displayed:
The Autoflex pin matrix has already been setup for this product from the
board dimensions.
4. Use the Left, Right, Up and Down keys (F4 - F7), to select the pin positions
required for editing.
5. Use the Lower and Raise keys (F1 - F2), to select or deselect the pins.
6. Select Exit (F8).
7. Select Save (F2).
8. Select Exit (F8).
Autoflex Matrix
14
13
12
11
10
9
8
7
6
5
4
3
2
1
AB CDEF GH I J KLMN
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
O
Lower Raise Reset Left Right Up Down
Exit
Lower Raise Reset Left Right Up Down
Exit
Lower Raise Reset Left Right Up Down
Exit
Change
Autoflex
Save Next Previous Incr. Decr. Exit
Change
Autoflex
Save Next Previous Incr. Decr. Exit
INFINITY
0$&+,1(352*5$00,1*
67$*()$872)/(;722/,1*
Software Version 7 User Manual 1.61
9. Select Exit (F8).
10.Select Exit (F8). The rail moves to the board width and the selected Autoflex
pins rise.
11. Select Setup (F6).
12.Select Change Tooling (F6).
13.Select Board Stop (F4). The camera moves to the board stop position. The
board stop on the camera extends.
14.Select Raise Head (F2).
15.Raise the printhead using two button control.
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Run Head
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Adjust
Raise
Head
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
INFINITY
0$&+,1(352*5$00,1*
67$*()$872)/(;722/,1*
1.62 User Manual Software Version 7
The following window and menu bar is displayed:
16.Fit the head prop.
17.Press Confirm (F1).
18.Select Board Clamps (F3), to open the clamps.
19.Slide a board along the rails to abut the board stop.
20.Select Board Clamps (F3), to close the clamps.
21.Select Lower Head (F2).
Hazardous Operation
The head must be propped while it is
raised
Insert the Head Prop.
Confirm
Lower
Head
Confirm
Lower
Head
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop