DEK INFINITY USER MANUAL - 第64页
INFINITY 0$&+,1( 352*5$ 00,1* 67$*() $87 2)/(;722/,1* 1.62 User Manual Software Versi on 7 The following window and menu bar is displayed: 16. Fit t he head prop. 17. Pr ess Conf irm (F1). 18. Se lect Board Cl…
INFINITY
0$&+,1(352*5$00,1*
67$*()$872)/(;722/,1*
Software Version 7 User Manual 1.61
9. Select Exit (F8).
10.Select Exit (F8). The rail moves to the board width and the selected Autoflex
pins rise.
11. Select Setup (F6).
12.Select Change Tooling (F6).
13.Select Board Stop (F4). The camera moves to the board stop position. The
board stop on the camera extends.
14.Select Raise Head (F2).
15.Raise the printhead using two button control.
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Run Head
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Adjust
Raise
Head
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
INFINITY
0$&+,1(352*5$00,1*
67$*()$872)/(;722/,1*
1.62 User Manual Software Version 7
The following window and menu bar is displayed:
16.Fit the head prop.
17.Press Confirm (F1).
18.Select Board Clamps (F3), to open the clamps.
19.Slide a board along the rails to abut the board stop.
20.Select Board Clamps (F3), to close the clamps.
21.Select Lower Head (F2).
Hazardous Operation
The head must be propped while it is
raised
Insert the Head Prop.
Confirm
Lower
Head
Confirm
Lower
Head
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop
Adjust
Lower
Head
Board
Clamps
Set
Stop
INFINITY
0$&+,1(352*5$00,1*
67$*()$872)/(;722/,1*
Software Version 7 User Manual 1.63
The following window and menu bar is displayed:
22.Remove the Head Prop.
23.Select Confirm (F1).
24.Lower the printhead using two button control.
25.Close the front printhead cover.
26.Press the System button.
27.Select Home Camera (F4).
28.Select Print Height (F7).
29.Select Raise Head (F2).
Hazardous Operation
The head is about to be lowered
Remove the Head Prop and confirm that
everyone is standing clear.
Confirm Cancel
Confirm Cancel
Adjust
Raise
Head
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
Adjust
Raise
Head
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Raise
Head
Home
Position
Exit