DEK INFINITY USER MANUAL - 第77页
INFINITY 0$&+,1 (352*5 $00,1* 67$*( 9,6 ,216<67(0 6(783 Soft ware Ver sion 7 User Manual 1.75 20. Se lect Lo cate Fi ducial ( F2). A figure appears on the monitor indicating the score of the fit between th…
INFINITY
0$&+,1(352*5$00,1*
67$*(9,6,216<67(06(783
1.74 User Manual Software Version 7
14.Use the Next, Previous, Incr. and Decr. keys (F4 - F7), to highlight and
adjust the lighting parameters to a level whereby the fiducials are just
whiting out, without blooming, default level 8 is usually adequate for the
majority of setups.
15.Select Exit (F8).
16.Select Learn Fiducial (F1).
Setup the fiducials appearing in the right hand box on the monitor.
17.Use the Next, Previous, Incr. and Decr. keys (F4 - F7), to highlight and
adjust each circle parameter in turn to obtain the best fit over the fiducial.
NOTE
Once aligned it may be necessary to change the line fiducial dimension to
achieve a better fit.
18.Select Learn Fiducial (F1). The message ‘Learning Fiducial - Please
Wait’ is displayed in the message prompt bar.
19.Select Exit (F8).
Next Previous Incr. Decr. Exit
Next Previous Incr. Decr. Exit
Learn
Fiducial
Locate
Fiducial
Set
Light
Next Previous Incr. Decr. Exit
Circle Parameters
mm
mm
mm
mm
mm
xxx
xxx
xxx
xxx
xxx
Position X
Position Y
Diameter
InnerContour
OuterContour
Video Model
When using video model the parameters are as follows:
Video Model, Position X, Position Y, Fiducial X, Fiducial Y
Learn
Fiducial
Next Previous Incr. Decr. Exit
Learn
Fiducial
Next Previous Incr. Decr. Exit
Learn
Fiducial
Next Previous Incr. Decr. Exit
INFINITY
0$&+,1(352*5$00,1*
67$*(9,6,216<67(06(783
Software Version 7 User Manual 1.75
20.Select Locate Fiducial (F2).
A figure appears on the monitor indicating the score of the fit between the
synthetic fiducial and the actual fiducial. The synthetic fiducial parameters
may need resetting and re-learning to obtain a better figure if there are other
features in the camera window.
21.Select Exit (F8).
22.Select Exit (F8).
23.Select Step (F1).
NOTE
If selective print/pass through is enabled, the first board fiducial should now
be displayed on the monitor. In this case repeat Steps 11 - 23 for this fiducial.
The first screen fiducial should now be displayed on the monitor.
24.Repeat Steps 11 - 22 for this fiducial.
25.Continue for other selected fiducials by selecting Step at the end of each
fiducial setup.
Learn
Fiducial
Locate
Fiducial
Set
Light
Next Previous Incr. Decr. Exit
Location
Fiducial
1
X
0.038
Y
-0.017
Score
984
Locate
Fiducial
Exit
Learn
Fiducial
Locate
Fiducial
Set
Light
Next Previous Incr. Decr. Exit
Step Head
Fiducial
Setup
Adjust
Search
Step
Search
Reset
Single Exit
INFINITY
0$&+,1(352*5$00,1*
67$*(9,6,216<67(06(783
1.76 User Manual Software Version 7
If the current product includes at least one inspection site, changing the value
of the parameter causes the following warning and menu bar to be displayed:
On selecting Apply the alterations to the fiducial positions become effective
and are applied to all inspection sites.
On selecting Abandon Changes the alterations to the fiducial positions are
discarded, the positions of the inspection sites remain unaltered and control
is returned to the initiating sequence.
On selecting Don’t Apply the alterations to the fiducial positions become
effective, but are not applied to the inspection sites.
26.After Step 25 for the second screen fiducial the message ‘Saving Fiducial
Data - Please Wait Board data file saved’ is displayed. After aligning
screen to board the camera checks all four fiducial positions. Go to Step 37.
27.Select Fiducial Setup (F3). The message ‘Adjust the X and Y values to
bring it into view. Enclose it within the ROI and then select Auto Learn.’
is displayed.
With auto fiducial setup enabled the monitor displays the following:
The following window is displayed:
Warning
From the changes made to fiducial positions
do you want a correction to be applied to
all inspection sites?
Apply
Abandon
Changes
Don’t
Apply
Step Head
Fiducial
Setup
Adjust
Search
Step
Search
Reset
Single Exit
BoardFiducial1
FiducialType
Background
AcceptScore
FiducialX
FiducialY
Circle
Dark
700
184.4
77.9