ASM_Guide To Adhesive Dot Dispensing_Stinger_en_0321_online - 第2页
The legal form of this notice can be read at www .asm-smt.com/disclaimer This information is provided in good faith; it is believed to be accurate and sufficient for the intended purpose This information remains the prop…
ENABLING THE DIGITAL WORLD
GUIDE TO ADHESIVE DOT DISPENSING
Edition 03/2021 EN
STINGER
TM
The legal form of this notice can be read at www.asm-smt.com/disclaimer
This information is provided in good faith; it is believed to be accurate and sufficient for the intended purpose
This information remains the property of ASMAS Group
ASMAS Group are not liable for the consequences of applying this information
ASMAS Group are free to alter this information without notice
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Singapore Pte Ltd Group
ASM Assembly Systems Weymouth Ltd
11 Albany Road
Granby Industrial Estate
Weymouth, Dorset
DT4 9TH, England
Item no.: 88198825-01-07
www.asm-smt.com Printed by ASM Assembly Systems
®
TM TM TM TM TM TM TM
DirEKt Ball Placement , Grid-Lok , HawkEye , Interactiv , ProFlow , PumpPrinting and VectorGuard
are trademarks of ASM Assembly Systems Pte Ltd.
Microsoft is a registered trademark of Microsoft Inc.
Windows 7, Standard Embedded and Windows 10 IoT Enterprise are trademarks of Microsoft Inc.
All other brand and product names are trademarks or registered trademarks of their respective holders.
is a registered trademark of ASM Assembly Systems Pte Ltd.
Please note the following:
3GUIDE TO ADHESIVE DOT DISPENSING STINGER 03/2021
Table of Contents
TABLE OF CONTENTS
1 MANUAL INFORMATION 5
1.1 MANUAL SCOPE 5
1.2 MANUAL CHANGE REQUEST 5
2 STINGER, A GUIDE TO ADHESIVE DOT DISPENSING 7
2.1 WARNING, MANDATORY AND SAFETY NOTICES 7
2.1.1 Warning Notices 7
2.1.2 Mandatory Notices 7
2.1.3 Equipment Specific Safety Notices 7
2.1.4 Compliance Labels 8
2.1.5 Equipment Label Locations 8
2.2 INTRODUCTION 10
2.2.1 Overview 10
2.2.1.1 Purpose 10
2.2.1.2 Elements 10
2.2.1.3 Syringe Assembly 11
2.2.1.4 Adhesive Delivery Mechanism 11
2.2.1.5 Nozzles 12
2.2.2 Purge Station 12
2.2.3 Sensors And Motors 13
2.2.4 Capacitive Level Sensor 13
2.2.5 Laser Surface Height Detector 14
2.2.6 Auger Motor 14
2.2.7 Z Axis Motor 14
2.2.8 Control Interface 15
2.3 SOFTWARE INTERFACE 16
2.3.1 Parameters 16
2.3.2 Machine Setup Options 18
2.3.2.1 Stinger Consumable Monitoring 19
2.3.2.2 Laser Correction 22
2.3.2.3 Purge Station Location 22
2.3.2.4 Accumulated Purge Time Limit 23
2.3.2.5 Calibrate Purge Pot Locations 24
2.3.3 Product Setup Functionality 25
2.3.3.1 Pre Separation Delay/Post Separation Delay 25
2.3.3.2 Dispense Separation Speed/Dispense Normal Speed 26
2.3.3.3 Z-Axis Material Reverse Height/Z-Axis Material Reverse Speed 26
2.3.3.4 Purge After Downtime 27
2.3.3.5 Stinger Idle Height 27
2.3.3.6 Stinger Dispense 27
2.3.3.7 Purging Location 28
2.3.3.8 Material Feed Speed/Material Reverse Speed 28
2.3.3.9 Calibration Point X/Calibration Point Y 29
2.3.3.10 Machine Commands Panel 30
2.3.4 Adding Sites 32
2.3.5 Load A Product Image 33
2.3.6 Create Sites 34
2.3.7 Setup Sites 38
2.3.8 Calibrating Stinger Heights 41
2.3.8.1 Siting The Calibration Point 41
2.4 PRODUCT CHANGEOVER 43
2.4.1 Product Changeover Page 44