222085 Issue 1 - Horizon APiX Appendix Manual - 第36页
Appendix to Micron Technical Manuals APPENDIX C T echnical Reference Information
INSTALLATION APPENDIX
PRE POWER UP CHECKS
2.16 Appendix to Micron Technical Manuals Chapter Issue 1 June 15
7. Connect the two probes of a digital volt meter (DVM) together and ensure
that the DVM is reading 0 ohms.
8. Measure the resistance between the earth tag and all three isolator mount
securing screws ensuring that all measurements are less than 0.5 ohms.
9. Remove the Rear Panel of the machine.
10. Measure the resistance between the following points ensuring that all
measurements are less than 0.5 ohms:
a. PC earth stud and a securing screw that secures the PC to the machine
frame.
b. M36 earth stud and a securing screw that secures the M36 to the machine
frame.
c. M37 earth stud and a securing screw that secures the M37 to the machine
frame.
d. M39 earth stud and a securing screw that secures the M39 to the machine
frame.
11. Refit the Rear Panel.
12. Refit the terminal cover.
13. Refit the mains isolator cover.
14. Refit the Front Panel.
Appendix to Micron Technical Manuals
APPENDIX C
Technical Reference
Information
Appendix to Micron Technical Manuals