00196577-03 JG S-Feeder Care Test Station EN - 第4页
Job Guide S-Feeder Test Station4 Contents 4 3.8 Setting the Pitch to 4 mm. 25 3.9 Test Tapes for the Different Feeder Types 26 3.10 Inserting the Test Tape 28 3.11 Testing the Feeder 29 3.12 Selecti ng the Track 30 3.13 …
Job Guide S-Feeder Test Station3
Contents
3
Table of Contents
1 Introduction 7
1.1 General 7
1.2 Use of Symbols 8
1.3 Safety Instructions 9
1.4 Overview of Devices 11
1.5 Contact Surface 12
2 Preparations 13
2.1 Switching on the S Feeder Test Station 13
2.2 Starting the Program 14
2.3 User Interface 15
3 Performing the Test 17
3.1 Fitting the Feeder 18
3.2 Connecting the Feeder 19
3.3 Selecting the Feeder Type 20
3.4 Switching on the Live Image 21
3.5 Checking the Pickup Position 22
3.6 Switching Tracks 23
3.7 Switching off the Live Image 24
Job Guide S-Feeder Test Station4
Contents
4
3.8 Setting the Pitch to 4 mm. 25
3.9 Test Tapes for the Different Feeder Types 26
3.10 Inserting the Test Tape 28
3.11 Testing the Feeder 29
3.12 Selecting the Track 30
3.13 Results Display 31
3.14 Results Display: Details 32
3.15 Results Display: Name Protocol 34
3.16 Results Display: Display Protocol 38
3.17 Results Display: Save Protocol 39
3.18 Protocl for Feeder Manager 40
3.19 Disconnecting the Feeder 41
3.20 Removing the Feeder 42
3.21 Results Display (Negative) 43
3.22 Results Display: Log (Negative) 44
3.23 Troubleshooting for Negative Measuring Results 45
3.24 Test with feeder feducial (for 2x8mm S Feeder only) 46
4 Function Test 51
4.1 Introduction 51
4.2 Control Panel 52
