00196577-03 JG S-Feeder Care Test Station EN - 第49页
Performing the Test – Test with feeder feducial (for 2x8mm S Fe eder only) 49 NOTICE Measuring without chec king the feeder feducial Feeder which has been teste d this way should be marked respecti vely. The checking of …
Performing the Test – Test with feeder feducial (for 2x8mm S Feeder only)
48
Performing the Test – Test with feeder feducial (for 2x8mm S Feeder only)
49
NOTICE
Measuring without checking the feeder feducial
Feeder which has been tested this way should be marked respectively.
The checking of the feeder feducial can be deactivate for 2x8mm S-Feeder only.
The following warning will be shown on the display and in the protocol.
WARNING
Feducial recognition deactivated
Checking is performed without feducial recognition.
This function is available for 2x8mm S-Feeder only. In case the feducial cannot be identified by the position recog-
nition the feducial regognition can be deactivated. These feeder must not be used at the station using the feeder
recognition function.
Performing the Test – Test with feeder feducial (for 2x8mm S Feeder only)
50