00196622-03_OM_WPC5_6_EN - 第10页

Introduction Important Notes about this Manual 1.3.1 Contents and Filing of t his Manual 10 Operating Manual SIPLACE WPC5/WPC6 1.3 1 . 3 I m p o r t a n t N o t e s a b o u t t h is M a n u a l Important Notes about this…

Introduction

1.2.4 Correct Usage Module Description

Operating Manual SIPLACE WPC5/WPC6 9

1.2.4

1.2.4 Correct Usage

Correct Usage

The product may only be used for the application described in the catalogues and technical specifica-

tions i.e. for placement of SMD components and only in connection with the third party devices and com-

ponents recommended or approved by SIPLACE.

Any other use is deemed to be incorrect and not as prescribed.

If the product is not used as prescribed, SIPLACE will accept no liability for any damage that may occur

and will not guarantee that the components will work properly and without problems.

Prescribed or correct usage includes the observance of all the instructions in the user manual.

The proper and safe operation of the product requires correct transportation, storage, installation and

assembly, plus careful, accurate utilization and servicing.

1.2.5

1.2.5 Incorrect Usage

Incorrect Usage

Failure to use the product as prescribed can result in both danger to life and limb and material damage.

For this reason any use that is not prescribed is not allowed. If the product is not used as prescribed,

SIPLACE will accept no liability for any damage that may occur and will not guarantee that the compo-

nents will work properly and without problems.

Failure to use the product as prescribed includes, for example:

▪ The use on other machines than those machine types officially approved by SIPLACE for this prod-

uct.

▪ The use of the product in a working environment which deviates from that described in this manual.

▪ Use of the placement machine with the installed product by unqualified personnel.

1.2.6

1.2.6 Noise Emissions

Noise Emissions

1.2.7

1.2.7 Environmentally-Friendly Disposal of Materials and Components

Environmentally-Friendly Disposal of Materials and Components

SIPLACE products are manufactured using only materials and parts that can be easily separated and

disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the installa-

tion, dismantling or operation of the machine.

1.2.8

1.2.8 Electromagnetic Compatibility (EMC)

Electromagnetic Compatibility (EMC)

All SIPLACE products are designed and tested for professional use in industrial applications. Electro-

magnetic compatibility in terms of the emission of interference cannot be guaranteed in any other envi-

ronment.

1.2.9

1.2.9 Use of Original SIPLACE Accessories and Spare Parts

Use of Original SIPLACE Accessories and Spare Parts

Only use original spare parts and authorized accessories. The use of other parts will affect safety and

will invalidate the liability for any consequential damage.

Noise emissions 75 dB (A)

At maximum moving speed of the tower (short-

time, approx. 1 second)

80 dB (A)

NOTICE

The company operating the system has sole responsibility for the proper, environmentally-

friendly disposal of machines, working materials, consumables and wear parts.

► Please observe your national statutory provisions for waste disposal and environmental

protection.

Introduction

Important Notes about this Manual 1.3.1 Contents and Filing of this Manual

10 Operating Manual SIPLACE WPC5/WPC6

1.3

1.3 Important Notes about this Manual

Important Notes about this Manual

1.3.1

1.3.1 Contents and Filing of this Manual

Contents and Filing of this Manual

This manual contains basic notes on assembly, operation and maintenance of the module. The service

engineers, qualified staff, operators and users must therefore read it before commencing installation and

commissioning. Make sure that the manual is always available wherever the module is operated.

1.3.2

1.3.2 Danger Notes

Danger Notes

1.3.3

1.3.3 Liability of the Manufacturer/Supplier

Liability of the Manufacturer/Supplier

We draw your attention to the fact that these instructions only contain descriptive and explanatory ma-

terial and do not include any contractual conditions or undertakings. All obligations of SIPLACE proceed

from the conclusion of the contract concerned, under which you have the machine described herein. This

applies in particular to all statements regarding performance or service life and the agreed liability for

faults or defects. The provisions of the contract regarding the liability for faults or defect are neither ex-

tended nor restricted by any statements in this manual.

1.3.4

1.3.4 Release History

Release History

1.3.5

1.3.5 SIPLACE on the World Wide Web (WWW)

SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE® homepage at http://www.siplace.com.

► Select either the German or English version.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can access the

SIPLACE User Group

. Here you can call up special

information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

► Click on the Register link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

WARNING

A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

All work must be carried out by appropriately trained and qualified personnel.

All warning, caution and danger notes MUST be observed.

► Carefully read through the chapter on operational safety in the operating manual for this

purpose.

Manual Software version Edition

First edition WPC5 Operating Manual From SR/MC 703.xx 06/2009

Update WPC5/WPC6 Operating

Manual

From SR/MC 704.xx 04/2010

Update WPC5/WPC6 Operating

Manual

09/2015

Introduction

1.3.5 SIPLACE on the World Wide Web (WWW) Abbreviations

Operating Manual SIPLACE WPC5/WPC6 11

1.4

1.4 Abbreviations

Abbreviations

CO Component

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

C&P12 Collect&Place head with 12 segments

C&P20 Collect&Place head with 20 segments

C&P6 Collect&Place head with 6 segments

CPP Collect&Pick&Place head

EMC Electromagnetic compatibility

ESD Electrostatic sensitive device

PA Placement area

PCB Board

P&P Pick&Place

SC Station computer

TH TwinHead

VS Vision system

WPC Wafflepack Changer

WPC4 Wafflepack Changer Version 4

WPC 5 Waffle Pack Changer Version 5

WPC6 Waffle Pack Changer Version 6