SIPLACE DX4-Spec-设备性能参数-EN-DMS - 第14页
14 SIPLACE Placement Head Nozzle Changers Description Nozzle changers incr ease the flexibility of the placement heads when it comes to pro- cessing different compo- nents. The nozzle configuration can be rapidly adjuste…
13
SIPLACE Placement Head
SIPLACE SpeedStar (C&P20)
SIPLACE SpeedStar
component camera type 23
(C&P20)
Standard-
functions
High-resolution camera, vacuum sensor, force measurement, component sen-
sor, integrated turning station per segment, PCB warpage check, individual
image of each component
Options Nozzle changer, special nozzles
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific
standards, the component packaging tolerances and the component tolerances.
01005 to 2220, Melf,
SOT, SOD
Component spec.
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
4 mm
0.25 mm
0.1 mm
0.4 mm
0.2 mm
0.4 mm x 0.2 mm
6mm x 6 mm
1 g
Programmable set-down
force
1.5 N - 4.5 N
Nozzle types 10xx, 11xx, 12xx
X/Y accuracy
b
b) Accuracy values measured in accordance with vendor-neutral IPC standard.
± 41 µm/3
± 55 µm/4
Angular accuracy ± 0.5° / 3
± 0.7° / 4
Illumination levels 5
Possible illumination level
settings-
256
5
14
SIPLACE Placement Head
Nozzle Changers
Description
Nozzle changers increase
the flexibility of the placement
heads when it comes to pro-
cessing different compo-
nents. The nozzle
configuration can be rapidly
adjusted to changing place-
ment jobs. Precisely defined
positions and perfect nozzle
seat in the garage ensure
minimum radial eccentricity
on the placement head.
The nozzle changers for the
SpeedStar are fitted with a
monitoring device which
checks whether the nozzle
magazine is seated correctly
on the mount.
Nozzle changer for the SpeedStar
Technical Data
Dimensions (length x width x height) 449 mm x 94.5 mm x 79 mm
Number of magazines
Location 1 and 3:
Location 2 and 4:
6
a
4
a
a) All magazines in the nozzle changer must be configured.
Number of nozzle garages
Location 1 and 3:
Location 2 and 4:
72
48
Standard configuration 6 magazines with 72 nozzle garages
Nozzle types 10xx, 11xx and 12xx
Compressed air connection 0.45 MPa (4.5 bar)
Magazine for 12
type 10xx, 11xx and 12xx nozzles
15
PCB Conveyor
Single Conveyor
On the single conveyor,
PCBs are moved one after
the other into the placement
machine and placed on a
conveyor lane.
Conveyor principle
Once the board has reached
the placement area, it is gen-
tly braked. As soon as the
board has reached its target
position, the conveyor belt is
stopped and the board is
clamped from below. The
placement process then
starts immediately. Move-
ment and clamping of the
PCBs is monitored.
Position of conveyor
edges
The conveyor can be easily
matched to many different
PCB widths by the automatic
electrical width adjustment.
The fixed conveyor side can
be either right or left in single
conveyors.
Single conveyor