SIPLACE DX4-Spec-设备性能参数-EN-DMS - 第16页

16 PCB Conveyor Flexible Dual Conveyor Flexible dual conveyor To keep the range of PCBs to be processed as wide as possible - whilst maintaining maximum productivity - the flexible SIPLACE dual con- veyor allows you to c…

PCB Conveyor

Single Conveyor

On the single conveyor,

PCBs are moved one after

the other into the placement

machine and placed on a

conveyor lane.

Conveyor principle

Once the board has reached

the placement area, it is gen-

tly braked. As soon as the

board has reached its target

position, the conveyor belt is

stopped and the board is

clamped from below. The

placement process then

starts immediately. Move-

ment and clamping of the

PCBs is monitored.

Position of conveyor

edges

The conveyor can be easily

matched to many different

PCB widths by the automatic

electrical width adjustment.

The fixed conveyor side can

be either right or left in single

conveyors.

Single conveyor

PCB Conveyor

Flexible Dual Conveyor

Flexible dual conveyor

To keep the range of PCBs to

be processed as wide as

possible - whilst maintaining

maximum productivity - the

flexible SIPLACE dual con-

veyor allows you to choose

between single conveyor

mode and dual conveyor

mode. In the dual conveyor,

two boards are moved into

the placement machine and

placed either at the same

time (synchronous mode) or

alternatively (asynchronous

mode). This makes it possi-

ble to process the top and

bottom sides of a board in

one line.

Synchronous mode

In synchronous mode, two

PCBs are moved into the

placement position at the

same time. They are pro-

cessed as a common panel.

When using products with

widely differing placement

contents, common optimiza-

tion of the entire placement

content for both boards can

enhance performance.

Asynchronous mode

In asynchronous mode, only

one PCB is processed per

conveyor lane. At the same

time, another PCB in the sec-

ond conveyor lane is moved

into the placement position.

This saves the full conveying

time of one PCB, thus con-

siderably increasing perfor-

mance, particularly for PCBs

with a short cycle time. The

placement process starts as

soon as one PCB is trans-

ported into the processing

area.

I-Placement

In addition to synchronous

and asynchronous conveyor

mode, a new placement con-

cept has been developed for

the SIPLACE DX4: I-Place-

ment. In this mode, the two

heads work simultaneously

and populate a PCB totally

independently of one

another. This further

increases the output.

The background: the place-

ment heads and component

feeder modules of the

SIPLACE DX4 have acceler-

ated component pickup to

such a degree that it is now

the transport path to the

board and not the pickup pro-

cedure which has become

the speed-restricting factor.

Flexible dual conveyor

Asynchronous placement mode

or I-Placement

PCB Conveyor

Technical Data

Single Conveyor Flexible dual con-

veyor

Dual conveyor in sin-

gle conveyor mode-

Board dimensions

(length x width

)

Standard:

a) When using boards with a width > 450 mm, make sure the peripheral module can also process the PCB width

concerned.

50 mm x 50 mm to

285 mm x 560 mm

50 mm x 50 mm to

285mm x 325mm

50 mm x 50 mm to

285 mm x 560 mm

Option: “Long Board 380

b) "Long Board" option with restrictions.

50 mm x 50 mm to

380 mm x 560 mm

50 mm x 50 mm to

450mm x 325mm

50 mm x 50 mm to

450 mm x 560 mm

Option: “Long Board 550

50 mm x 50 mm to

550 mm x 560 mm

-- --

Stationary conveyor side Right or left Right, left or outer

Automatic electrical width

adjustment-

Yes

PCB thickness

Standard: 0.3 mm to 4.5 mm

PCB warpage see page 19

PCB weight

Standard

c) The board weight value refers to the weight of the board plus the weight of the components.

max. 2.0 kg max. 1.0 kg max. 2.0 kg

Clearance on PCB underside

Standard stopper:

Up to 25 mm

PCB transport height

Option:

Standard:

SMEMA option:

900 mm

930 mm

950 mm

Type of interface:

Standard:

Option:

SMEMA

Siemens

Component-free PCB handling

edge

3 mm

PCB changeover time

Single Conveyor

Dual conveyor

d) 0 seconds in asynchronous mode, otherwise 1.5 seconds.

< 1.5 seconds

0 seconds

Important information for machines in combination with SIPLACE DX4

When setting up a machine (D-, S-; F, HS, HF, X or SX series) next to a SIPLACE DX4, take note of the limited space

between the two machines. In these cases, a suitable conveyor extension is needed to create an operating space of

0.5 m between the machines.