SIPLACE DX4-Spec-设备性能参数-EN-DMS - 第21页

21 Component Feeding SIPLACE DX Changeover Table (Option) DX changeover table The DX changeover tables are indepen dent and easi ly maneuverable module s. The SIPLACE DX4 machines can accommodate four DX changeover table…

Component Feeding

SIPLACE DX4 Table

In its default configuration,

the SIPLACE DX4 has four

DX tables which, if used with

SIPLACE 2x8mm X tape

feeder modules, can be set

up to achieve capacity of up

to 40 tracks each for accom-

modating component types.

Feeder modules can be torn

down or added to the config-

uration even during ongoing

placement.

External setup tables, which

can be equipped with a sin-

gle-track feeder module-

energy interface, help to sup-

ply the feeder modules with

materials. These are then

easily and quickly docked

into the machine.

The component feeders are

at rest during the placement

process - allowing tapes to

be spliced without stopping

the machine.

With the help of an optional

component barcode reader

and the Setup Center option,

the barcodes on the tape

reels can be read and

checked.

This ensures the correct

assignment of components

to tracks and the traceability

of PCB placement with the

Traceability software.

For safety reasons, unoccu-

pied locations are fitted with

so-called dummy feeder

modules.

Tape container

Waste container for remaining empty

tape

DX4 table

Technical Data

Tape reel diameter 178 mm to 381 mm (7“ - 15“)

Max. component feeding

(Four DX tables for SIPLACE DX4)

Location 1 and 3:

Location 2 and 4:

74 tape feeder modules, each with 2x8 mm X

40 feeder modules, each with 2x8 mm X

34 feeder modules, each with 2x8 mm X

Component Feeding

SIPLACE DX Changeover Table (Option)

DX changeover table

The DX changeover tables

are independent and easily

maneuverable modules. The

SIPLACE DX4 machines can

accommodate four DX

changeover tables, each with

40 tracks. Just like the fixed

DX tables, the DX change-

over tables are optimized for

the use of 2x8 mm SIPLACE

tape feeder modules when

using 8 mm tapes. By using

20 of these feeder modules,

you can achieve a full setup

capacity of 40 8mm tracks.

The tape reels are taken up

into the tape container of the

DX changeover table. A cut-

ting device on the machine

automatically cuts the used

tape material. The DX

changeover tables can be

set up directly on the

machine or at an external

setup area with feeder mod-

ules. The benefits of offline

setup are that the configura-

tions can be prepared with-

out stopping the line.

This allows the setup to be

changed very quickly using

the DX changeover table

principle. The SIPLACE DX

changeover table also sup-

port fast setting up and tear-

ing down of feeder modules

even during the placement

process.

The component feeders are

at rest during the placement

process - allowing tapes to

be spliced without stopping

the machine.

With the help of an optional

component barcode reader

and the Setup Center option,

the barcodes on the tape

reels can be read and

checked.

This ensures the correct

assignment of components

to tracks and the traceability

of PCB placement with the

Traceability software.

For safety reasons, unoccu-

pied locations are fitted with

so-called dummy feeder

modules.

DX changeover table

Tape container

Changeover table

Component Feeding

SIPLACE DX Changeover Table (Option)

Technical Data

DX changeover table dimensions

DX changeover table

X (length x width)

752 mm x 592 mm

Height

900 mm (PCB transport height:

930 mm (PCB transport height:

950 mm (PCB transport height:

890 mm

920 mm

940 mm

DX changeover table weight

without feeder modules

fully configured with feeder modules

80.4 kg

139.6 kg

Tape reel diameter 178 mm to 381 mm (7“ - 15“)

Locations for feeder modules max. 40 feeder modules, each with 8 mm

Changeover time for DX changeover tables max. 1 minute

Max. component feeding

(Four DX tables for SIPLACE DX4)

Location 1 and 3:

Location 2 and 4:

74 tape feeder modules, each with 2x8 mm X

40 feeder modules, each with 2x8 mm X

34 feeder modules, each with 2x8 mm X

Feeder module types (SIPLACE X)

With adapter

Tape feeder modules, reject conveyor, stick mag-

azine and label feeder.