SIPLACE DX4-Spec-设备性能参数-EN-DMS - 第23页

23 Component Feeding X Tape Feeder Modules SIPLACE X tape feeder modules are intelligent tape feeder mo dules for flexible production environments, which simplify upgrading and conversion tasks consider- ably. All SIPLAC…

100%1 / 64
22
Component Feeding
SIPLACE DX Changeover Table (Option)
Technical Data
DX changeover table dimensions
DX changeover table
X (length x width)
752 mm x 592 mm
Height
900 mm (PCB transport height:
930 mm (PCB transport height:
950 mm (PCB transport height:
890 mm
920 mm
940 mm
DX changeover table weight
without feeder modules
fully configured with feeder modules
80.4 kg
139.6 kg
Tape reel diameter 178 mm to 381 mm (7“ - 15“)
Locations for feeder modules max. 40 feeder modules, each with 8 mm
Changeover time for DX changeover tables max. 1 minute
Max. component feeding
(Four DX tables for SIPLACE DX4)
Location 1 and 3:
Location 2 and 4:
74 tape feeder modules, each with 2x8 mm X
40 feeder modules, each with 2x8 mm X
34 feeder modules, each with 2x8 mm X
Feeder module types (SIPLACE X)
With adapter
Tape feeder modules, reject conveyor, stick mag-
azine and label feeder.
23
Component Feeding
X Tape Feeder Modules
SIPLACE X tape feeder
modules are intelligent tape
feeder modules for flexible
production environments,
which simplify upgrading and
conversion tasks consider-
ably. All SIPLACE X feeder
modules support tape splic-
ing as a standard, which pre-
vents machine stoppages
when refilling.
The benefits at a glance:
Conversion-friendly
• The SIPLACE X tape
feeder modules and the
intelligent SIPLACE soft-
ware solutions provide a
fast and efficient change-
over process.
• Omega profiles on the
tape feeder module and
table facilitate safe and
reliable upgrading and
conversion of tape feeder
modules during ongoing
production.
Robust
• Innovative drive technolo-
gy extends the service life
of the X tape feeder mod-
ules.
Intelligent
• A unique tape feeder mod-
ule ID ensures a precise
assignment of the compo-
nent to the tape feeder
module. This makes reli-
able setup verification
very simple.
• Component pitch, feeder
speed and other functions
are automatically set
when the setup program is
downloaded.
High feeding accuracy
• High-precision sensor
technology for path mea-
surement ensures highly
accurate component feed-
ing, even for 01005 place-
ments.
Operator-friendly
• Contactless data and
power transmission make
it easier to attach/remove
the tape feeder modules.
• Controls and displays sup-
port the user with current
information.
Technical Data
Tape feeder
module
L x H
[mm]
Width
[mm]
Tracks Transport
increment
[mm]
Max. tape
height
[mm]
2x8 mm X 587x200 22.9 2 1/2/4/8 3.5
8 mm X
a,b
587x200 10.8 1 1/2/4/8 3.5
12 mm X
a
587x200 22.6 2 4 - 16
c
6.5
Smart Feeder 12 mm X 587x200 22.6 2 4 - 16
b
16
16 mm X
a, d
587x200 34.4 3 4 - 20
c
25
Smart Feeder 16 mm X 587x200 22.6 2 4 - 20
b
16
Changeover time 8 s
a) PSA kit available as an option
b) The maximum number of tracks is reduced
c) In 4mm increments
d) PSA kit standard
24
Digital SIPLACE Vision System
The digital Vision system
ensures fast and reliable
component recognition, cou-
pled with user-friendly han-
dling. The system identifies
each individual component
by its geometry and color.
Even complex component
shapes, such as flip chip or
CCGA are detected with high
reliability.
This component recognition
check is performed in a sin-
gle step, with no extra time
involved but with optimum
scanning of each individual
component.
This digital Vision system is
not only used in the compo-
nent cameras but also in the
PCB camera. In addition to
the precise recognition of
components, this also guar-
antees reliable detection of
inkspots and PCB fiducials.
The benefits at a glance:
• Extremely fast and reliable
component recognition
• Shortest cycle times
• Robust measurement
based on the geometry
and color
• Straightforward program-
ming
• Offline programming of
component shapes
• Rapid introduction of new
products (NPI)
• Open architecture allows
you to quickly adapt to
new requirements
• Optimum placement
results based on individ-
ual measurement of each
component
The SIPLACE Vision sys-
tem offers inspection rou-
tines and functions to
enhance the quality of com-
ponent recognition.
The benefits at a glance:
• Maximum placement
quality
• High first pass yield
• Reduction of operating
costs
Examples of digital vision system analysis times
Evaluation times only play a role in the P&P process.
01005 9 ms
PLC44 17 ms
BGA 225 balls 18 ms