D-serie LEVEL II - 第151页
Component Handling Overview S tude nt Guide Advanced Level 2 SIPLACE D Series EN 05/2007 Component Handl ing 9-1 9 Component Handling 9.1 Overview This chapter descr ibes the preparatio n of compon ents with the compone …
C&P6/12 Placement Head
Room for Your Sketches and Notes Determining the Zero Point Correction for the C&P Head Star Axis
Student Guide Advanced Level 2 SIPLACE D Series
C&P6/12 Placement Head EN 05/2007
8-24
Component Handling
Overview
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Component Handling
9-1
9 Component Handling
9.1 Overview
This chapter describes the preparation of components with the component changeover tables, the
corresponding docking unit and the pneumatic cutter.
Up to four flexible changeover tables can be docked onto the D4/D3 (D1/D2: two) machine. The
changeover tables are automatically connected to/disconnected from the docking unit at the press of a
button. Plug-in electrical and pneumatic connections link the machine to the changeover table.
9-1: Positions of changeover tables and buttons for docking and undocking the tables (D4)
The table unit consists of the changeover table and the mechanics for raising and lowering the
changeover table.
Component Handling
Overview Technical Data - Changeover Tables
Student Guide Advanced Level 2 SIPLACE D Series
Component Handling EN 05/2007
9-2
9.1.1 Technical Data - Changeover Tables
Feeder capacity for D1/
D2 machines:
90 tracks for 8 mm tapes with 3x8 mm feeders
60 tracks for 8 mm tapes with 2x8 mm feeders
Feeder capacity for D4
machines:
144 tracks for 8 mm tapes with 3x8 mm S feeders
96 tracks for 8 mm tapes with 2x8 mm S feeders
Locations for D1/D2
machines:
2 changeover tables with integrated waste tape container
15 feeder positions, each one with 30 mm on each changeover table
Option: Waffle Pack Changer (10 feeder positions – 30 mm wide)
Locations for D4
machines:
4 changeover tables with integrated waste tape container
12 feeder positions, each one with 30 mm on each changeover table
Feeders: Tapes, bulkcase, linear feeder, Siplace S feeder (F4, F5,S20, S23, S25HM,
S27HM, HS50, HS50+,HS60), OEM feeder, surftape feeder (8, 12, 16, 24
mm), manual trays
Interface to the
machine
Plug-in connection to machine
- Power supply
- CAN bus connection
- Closing the safety loop
- Compressed air connection
- Splice point recognition connection (optional)
Changeover table
height
depend from the machine height:
830 mm ± 15 mm (standard)
900 mm ± 15 mm (SMEMA)
930 mm ± 15 mm (SMEMA)
950 mm ± 15 mm (SMEMA)