D-serie LEVEL II - 第188页
Modular Conveyor Conveyor Settings Conveyor Control S tuden t Guide Advanced Level 2 SIPLACE D Series Modular Conveyor EN 05/2007 10-22 *Switches 1- 2 set the hard ware ID 5 for th e D1, D2 and D4 m achines and I D 6 for…
Modular Conveyor
Conveyor Control Conveyor Settings
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Modular Conveyor
10-21
10.3.5.2 TSP 301
Jumper Settings for TSP 301
10-9: Jumper positions for conveyor control 301
Legend
1. J7 CAN bus 1 terminating resistor
2. F6 Main Fuse TSP 301
3. F1 - F5 Fuses for the conveyor motors
4. J3 interference loop
5. J6 CAN bus 2 terminating resistor (not used)
6. J2, J1 successor/predecessor station
7. S4 DIL switch
10-10: Jumper J1, J2 "successor/predecessor station" at TSP 301
Legend
J1 predecessor station
J2 successor station
J3 interference loop
J6 CAN bus 2 terminating resistor (not used)
J7 CAN bus 1 terminating resistor
Modular Conveyor
Conveyor Settings Conveyor Control
Student Guide Advanced Level 2 SIPLACE D Series
Modular Conveyor EN 05/2007
10-22
*Switches 1-2 set the hardware ID 5 for the D1, D2 and D4 machines and ID 6 for the SIPLACE X, HF
and D3 machines.
Conveyor Control Board TSP 301 with Siemens Interface (Option)
S D4 X/D3/HF Note
1ON ONON*
2ONOFF ON* = SIPLACE D4, OFF: SIPLACE X, HF, D3
3OFF OFF OFF= clamping sensor is no longer used
4OFF OFF Not used
5OFF OFF Not used
6OFF OFF Not used
7OFF OFF Not used
8OFF OFF Not used
DIL switch S4 at TSP 301
10-11: TSP 301 SMEMA --> Siemens
WARNING: Destruction of the board!
The 10 pin Locking clip plug of SMEMA
connections must be disconnected
from the TSP 301!
Application: no modification.
Following modification are necessary for using the
Siemens interface:
X JumperJ1 / J2: need to be moved (see
following diagram).
X Disconnect the connector X3 and X4 on the
TSP 301!
X Connect the Siemens interface cable on the
connector X1 and X2.
Legend
1. 10-pin plug for SMEMA interface
X3: predecessor station
X4: successor station
2. Connection for Siemens interface
X1: predecessor station
X2: successor station
Modular Conveyor
Conveyor Control Conveyor Settings
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Modular Conveyor
10-23
Siemens/SMEMA TSP 301 Interface
10-13: TSP 301 interface
10-12: Jumper J1 and J2 (Siemens/SMEMA)