JO-109-002_JG-0209.pdf - 第42页

2-6 JO-109 1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures 1005-001 (3) Detach the camera end protection cap located inside the LED lighting unit. Protection Cap Fig. B9 Note No image can be captu…

2-5

JO-109

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

1005-001

1.1.3 Procedure for Detachment of Fixtures

Procedure

(1) Detach the xtures for both Y and X axes.

Fixture for Y Axis

Fixture for X Axis

Screw (M4)

Screw (M3)

Fig. B7

(2) Fix the clamp plate (accessory) with the screws (M3) that were

used to fasten the xtures and tighten the clamp screw for rm

attachment.

X Axis

Y Axis

Clamp Screw

Clamp Plate

Screw (M3)

Fig. B8

2-6

JO-109

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

1005-001

(3) Detach the camera end protection cap located inside the LED

lighting unit.

Protection Cap

Fig. B9

Note

No image can be captured with the protection cap attached.

2-7

JO-109

1.2 Cable Connection

1005-001

1.2 Cable Connection

Notice

Check the seals on the device side and the cable ID plates. Both

IDs should match each other when the cables are connected.

Seals

ID Plates

Fig. B10

Fig. B11 Connection of Cables for Camera (used to capture the image of the pickup position)