JO-109-002_JG-0209.pdf - 第91页
4-3 JO-109 1. Registration of Master Position (Jig Origin Adjustment) 1005-001 (3) The "Master Setting" window opens. Conrm that a crosshair is displayed in the window . When no crosshair is displayed, press t…
4-2
JO-109
1. Registration of Master Position (Jig Origin Adjustment)
1106-002
NOTICE
Do not give a strong shock to the jig origin master
nor put any object on the master.
The pin of the jig origin master may be bent,
ruining the accuracy of the jig origin adjustment.
Pin of Jig Origin Master
Fig. D2 Pin of jig origin Master
(2) Press the [Master Setting] button in the "Initial Master Setting"
window.
Fig. D3
4-3
JO-109
1. Registration of Master Position (Jig Origin Adjustment)
1005-001
(3) The "Master Setting" window opens. Conrm that a crosshair is
displayed in the window.
When no crosshair is displayed, press the [+] button in the
window to make it appear.
(4) Move the micrometer until the center of the crosshair is aligned
with the pin center of the jig origin master.
NOTICE
Do not give a strong shock to the micrometer by
hitting against human body or an object.
Otherwise, the micrometer may be damaged,
resulting in inaccurate adjustment of the feeder's
component jig origin.
X (-)
Y (-)
X (+)
Y
(+)
Pin of Jig Origin Master
Crosshair
Direction of Tape Feed
Fig. D4 "Master Setting" Window
4-4
JO-109
1. Registration of Master Position (Jig Origin Adjustment)
1005-001
Note
To enlarge the image, press the [Enlarge] button in the "Master
Setting" window.
To get the original size, press the [Return] button.
Fig. D5
(5) Press the "ZERO/ABS" switch of the micrometer to reset the
indicated value of the micrometer head to "0.000".
"ZERO/ABS" Switch
Fig. D6 Micrometer