SIPLACE TX V2 micron 设备性能参数_DMS - 第16页
16 Board warpage Board warpage during placement To avoid impairing the p lacement quality and speed, we recommend using a PCB sup port, so that the PCB warpage downwa rds does not exceed 0.5 mm. Board warpage up, max. 2 …
15
Board warpage
Board warpage across the direction of travel
max. 1% of the PCB diagonal, but not
exceeding 2 mm.
Board warpage on the conveyor
Fixed clamped edge
Movable clamping device
Boar
Fixed clamped edge
Conveyor belt
Board transport direction
Front PCB edge
Front PCB edge
Board warpage in direction of travel + PCB thickness < 5.5 mm
Bending up of front PCB edge max. 2.5 mm
Left conveyor belt
Right conveyor belt
Board transport direction
16
Board warpage
Board warpage during placement
To avoid impairing the placement quality and
speed, we recommend using a PCB support, so
that the PCB warpage downwards does not
exceed 0.5 mm.
Board warpage up, max. 2 mm
Board support
Board warpage down, max. 2 mm
Changes in the surface position are automatically applied by the functions for learning the height.
17
Component feeding
Component trolley
Component trolley
SIPLACE TX m
The TX m component trol-
leys are independent and
easily maneuverable mod-
ules. Two component trol-
leys, each with 40 tracks, can
be docked onto SIPLACE TX
m machines. The tape reels
are taken up into the tape
container of the component
trolley. A cutting device on
the machine automatically
cuts up the used tape mate-
rial. The component trolleys
can be set up directly on the
machine or at an external
setup area with feeder mod-
ules. The benefits of offline
setup are that the configura-
tions can be prepared with-
out stopping the line.
This allows the setup change
to be realized very quickly,
using the changeover table
principle, to rapidly change
the component trolleys.
The SIPLACE TX m compo-
nent trolleys also support fast
setting up and tearing down
of feeder modules even
during the placement pro-
cess.
Tapes can be spliced without
stopping the machine.
For safety reasons, unoccu-
pied locations are fitted with
so-called dummy feeder
modules.
Component trolley SIPLACE TX m
Tape container
Waste container for remaining
empty tape
Changeover table
Component supply Tracks occupied
SIPLACE TX m
With C&P20 M3
With CPP M
38 feeder modules, each with 8mm Xi
40 feeder modules, each with 8mm Xi
Tape reel diameter to 330.2 mm (13")
Component trolley changeover time < 1 minute