Process Lens PL Service Manual_EN - 第20页

2 General 20 Se rv ic e Ma nu al P ro ce ss L en s PL - 0 3/ 20 25

100%1 / 168
2 General
Service Manual Process Lens PL - 03/2025 19
The Process Lens PL solder paste inspection machines are available in four different variants:
●
Process Lens PL Single-Lane (Item no.: 00701000)
Process Lens PL Single-Lane machines have a one-stage single conveyor (Single-lane). The
Vision Module has an Optical head with FOV 30x30 mm and camera resolution 15 μm/pixel.
●
Process Lens PL Dual-lane (Item no.: 00702000)
Process Lens PL Dual-lane machines have a three-stage dual conveyor. Synchronous inspection
can be performed with two boards loaded at the same time. The Vision Module has an Optical
head with FOV 30x30 mm and camera resolution 15 μm/pixel.
●
Process Lens PL HD Single-Lane (Item no.: 00703000)
Process Lens PL HD Single-Lane machines have a Vision Module HD and one-stage single con-
veyor (Single-lane). The Vision Module HD has an Optical head with:
– FOV 50x50mm
– camera resolution of 10μm/pixel and 20μm/pixel.
●
Process Lens PL HD Dual-Lane (Item no.: 00704000)
Process Lens PL HD Dual-Lane machines have a Vision Module HD and a three-stage dual con-
veyor. Synchronous inspection can be performed with two boards loaded at the same time. The
Vision Module HD has an Optical head with:
– FOV 50x50mm
– camera resolution of 10μm/pixel and 20μm/pixel.
For detailed information about the Process Lens PL solder inspection machine see also the operating
manual.
2 General
20 Service Manual Process Lens PL - 03/2025
3 Replacing spare parts
Service Manual Process Lens PL - 03/2025 21
3 Replacing spare parts
NOTICE
For a list of spare parts refer to the spare parts catalogue.
3.1 Vision module
3.1.1 Optical head
3.1.1.1 Replacing the optical head
Parts
03122959-xx Vision Module
03250225-xx Vision head DMD
●
Single Lane: PL-0144 and above
●
Dual Lane: PD0030 and above
Equipment and tools
●
Allen key size 2.5
Requirements
●
Machine is switched off.
Removal
Fig.3: Moving optical head to the middle of the machine
► Move the optical head(1) carefully to the
middle of the machine.
 CAUTION!
Sensitive camera system
The camera system is very sensitive and
must therefore not be touched.
Make sure you don’t touch the camera
when moving the gantry.
.