5OM-1610-002_w - 第25页
Safety Precautions Safe-14 1OM-1610 4. Alert Labels The alert labels (described below) are used for this machine. Please read the instructions on each label carefully and check the contents, observing the actual object. …
Safety Precautions
Safe-13
1OM-1610
Alert Indications described as " " (continued)
Alert Description Related Items
•
Even when the power breaker is set to "OFF", the primary line
is powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
"1.1" in
"Chapter 1 (Vol. 4)"
•
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the DC power supply and the servo amplier go "OFF" in 10 minutes
or more after the power breaker is set to "OFF".
"1.1" in
"Chapter 1 (Vol. 4)"
When the at ring is cut, take care not to get injured by the
commercially available cutter.
"3.2.6" in
"Chapter 1 (Vol. 4)"
CAUTION
1011-002
3. Alert Indications in Instruction Manual
Safety Precautions
Safe-14
1OM-1610
4. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
0911-001
4. Alert Labels
Safety Precautions
Safe-15
1OM-1610
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
E
E
C C
D
D
View D-DView E-E
(1)
(7)
(8)
(5)
(5) (5)
(5)
(22)
Front Side of Machine
(13)
F1X1
1011-002
4. Alert Labels