CP43维护手册.pdf.pdf - 第129页
14 – 3 V ersion 7.0 Chapter 14 Replacing Consumable Parts 14.3 Vision Processing UV Lamp Replacement T o replace the vision processing UV lamp, first r emove the br own plastic cover . Next remove the UV lamp. Do not tou…
Chapter 14 Replacing Consumable Parts
Fig. 14-1 Nozzle Seal Replacement
Table 14-1 Nozzles and Fluorescent Seal Numbers
ø0.7 S nozzle
ø1.0 S nozzle
ø1.3 S, M nozzles
ø1.8 M nozzle
ø2.5 M nozzle
ø2.5 L nozzle
ø3.7 L nozzle
ø5.0 L nozzle
Nozzle Size
Nozzle Assy
Number
Fluorescent
Seal
AMPH-8211
AMPH-8221
AMPH-8231
AMPH-8241
AMPH-8251
AMPH-8261
AMPH-8271
AMPH-8281
12
12
12
12
12
25
25
25
LPH-5010
LPH-5020
LPH-5030
LPH-5040
LPH-5050
MPH-3011
MPH-3021
MPH-3031
Diameter of
Luminescent Area
14 – 2
Version 7.0
CP IV-3 Maintenance
14 – 3
Version 7.0
Chapter 14 Replacing Consumable Parts
14.3Vision Processing UV Lamp Replacement
To replace the vision processing UV lamp, first remove the brown plastic
cover. Next remove the UV lamp. Do not touch the bulb with your bare
hands, as traces of oil will be left on the bulb, which will shorten its life.
Fig. 14-2 UV Lamp Assembly
14.4Replacing the Waste Tape Cutter
If waste tape is not being cut properly, tape feed may be slowed or tape
may get backed up. In such cases, replace the waste tape cutter.
Remove the cutter by unscrewing the two bolts on the moving and the
fixed cutter. Put in a new cutter and re-tighten the two bolts.
Fig.14-3 Tape Leaf Cutter Mechanism Bolts
CP IV-3 Maintenance
Chapter 14 Replacing Consumable Parts
14.5Valve Replacement
During automatic production, a nozzle sometimes produces repeated
errors. If the cause appears to be blockage or bends in the nozzle, the
spool valve may be deformed or O ring damage may have caused a
vacuum leak. The O ring is attached to the spool valve. Replace the spool
valve if necessary.
To remove the spool valve or O ring, unscrew the two bolts shown below.
Be careful not to break the O ring, as it is thin and fragile.
Fig.14-4 Spool Valve Assembly
14.6Changing the Mechanical Valve Filter
It is necessary to periodically clean the head spools (refer to section 15.10
for further details). When the spools are being cleaned, if the mechanical
valve filter is found to be dirty or damaged, promptly replace it with a
new one.
(1) Remove the filter from the valve casing. Tweezers can be used to
remove the filter.
Note: Ensure no refuse from the filter remains in the valve.
(2) Clear any refuse from the spool hole (indicated by the arrow in the
diagram below) using an air gun.
(3) Insert the new filter on the valve casing, ensuring the filter remains
round in shape.
14 – 4
Version 8.0
CP IV-3 Maintenance