CP43维护手册.pdf.pdf - 第167页

CP-43/43E Maintenance Manual 2nd Version December 8, 1993 4th Version September 26, 1994 4.1 Version January 30, 1995 6th Version June 15, 1995 7th Version September 27, 1995 8th Version October 1, 1996 8.1 Version Febru…

100%1 / 167
20 – 5
Version 7.0
Chapter 20 Memory Board Installation
(4) Remove the old battery and install the new one, as shown below.
(When ordering a new battery, specify lithium battery ER6-C, 3.6V.)
Fig. 20-5 Installing the Battery
(5) Remount the memory board in the VME rack and reconnect the SCSI
cable to the memory board.
(6) Turn on the power and boot up the machine. Carry out zero setting.
(7) Measure camera Proper data or load it from a backup SRAM memory
card.
Note: Refer to section 2.2 for instructions on loading camera Proper data
from SRAM memory card. Be especially careful to carry out the
procedures to confirm that data has loaded successfully. Be sure to
remove the SRAM memory card from the memory board and insert
the original ROM memory card before rebooting the machine.
(8) Turn off the power, then turn it back on and boot up the machine.
(9) Transmit a program from MCS to the machine and measure nozzle
centers.
CP IV-3 Maintenance
Chapter 20 Memory Board Installation
20 – 6
Version 7.0
CP IV-3 Maintenance
CP-43/43E Maintenance Manual
2nd Version December 8, 1993
4th Version September 26, 1994
4.1 Version January 30, 1995
6th Version June 15, 1995
7th Version September 27, 1995
8th Version October 1, 1996
8.1 Version February 21, 2000
8.2 Version October 10, 2000
FUJI Machine Manufacturing Co., Ltd.
SMT Equipment
19 Chausuyama, Yamamachi, Chiryu,
Aichi Prefecture, 472-8686 Japan
Copyright 2000 by Fuji Machine Manufacturing Co., Ltd.
Printed in Japan
The FUJI Internet
Fuji Internet aims at providing information to our customers in
the most efficient manner. This site makes a range of services
available, from manual updates and FAQs, to online technical
reports. Fuji hopes that this site will be used as a source of
information in addition to the services provided by your agent.
Fuji’s website is located at http://www.fuji.co.jp/
Fuji Internet membership is required to access the Technical
Information section of the site, contact your agent for details.
Any comments or opinions regarding this manual can be sent to
intnetqst@fuji.co.jp