CP43维护手册.pdf.pdf - 第24页

Chapter 2 Setting Up the CP IV -3 2.2 Leveling Place the machine on leveling sheets and adjust so that the machine is level to the ground. If the machine is not level, placing accuracy will be adversely affected. T o lev…

Chapter 2 Setting Up the CP IV-3

2. Setting Up the CP IV-3

This chapter explains how to set up the machine.

2.1 Setting Up the CP IV-3

Install the CP IV-3 in an area spacious enough that the machine doors may

be opened and that maintenance may be performed without forcing the

operator into an uncomfortable position. Figure 2-1 below shows the

amount of space that the CP IV-3 occupies when all the doors are open.

Fig. 2-1 Top View of CP IV-3 With All Doors Open

2 – 1

Version 4.0

Chapter 2 Setting Up the CP IV-3

2.2 Leveling

Place the machine on leveling sheets and adjust so that the machine is

level to the ground. If the machine is not level, placing accuracy will be

adversely affected. To level the machine, place a spirit level on the

unpainted portion of the main body of the machine (figure 2-3) and adjust

the leveling bolts while repeatedly checking the reading on the level.

Fig. 2-2 Position of Machine Leveling Sheets

Fig. 2-3 Spirit Level Placement Positions and Detailed View of Leveling

Bolts

2 – 2

Version 4.0

Chapter 2 Setting Up the CP IV-3

2.3 Air Supply

Fix a socket to the end of the air supply hose and connect the socket to the

air connector plug on the machine. Turn the air inlet handle until the filter

regulator reads 5 kg/cm

. Refer to figures 2-4 and 2-5 for more details.

Fig. 2-4 Air Inlet

Fig. 2-5 Detailed View of Air Inlet

Nipple

Hose (Inside

diameter 8 mm)

Note: Fuji does not supply the hose.

Air pressure at least 5 kg/cm

2 – 3

Version 8.0