CP43维护手册.pdf.pdf - 第42页
Chapter 4 Functions of the Parts 4 – 6 V ersion 1.0
Chapter 4 Functions of the Parts
4.5 Electrical System
The electrical system consists of a control box and operation panels.
4.5.1 Operation Panels
There are three operation panels on the machine. The controls
needed to operate the machine are installed on each of these.
Front operation panel: Located on the front of the machine, this
includes, apart from the controls necessary
to operate the machine, an operation
monitor and a monitor for the vision
processing at station 4.
Rear operation panel: Located on the rear of the machine, this
includes, apart from the controls necessary
to operate the machine, an operation
monitor.
Rear fence operation panel: Located on the central rear fence of
the machine, this includes a
front/rear panel operation key, a
start button, a cycle stop button, a
reset button, and an emergency stop
button.
4.5.2 Control Box
The two control boxes are located on the lower front sides of the
machine next to the servo boxes.
4.6 Air Supply System
This controls the flow and pressure of air (and/or vacuum) from the inlet
to where it is needed.
4.7 Machine Body
The machine body consists of a base, frame and covers.
Version 1.0 4 – 5
Chapter 4 Functions of the Parts
4 – 6Version 1.0
5 – 1
Version 6.0
Chapter 5 The Twelve Stations
5. The Twelve Stations
The role of each station is briefly described in figure 5-1. A more detailed
explanation of each station's role is presented in the rest of this chapter.
Fig. 5-1 The Twelve Stations and Their Roles
CP IV-3 Maintenance