141-400-57-probestationaccessoriescatalog - 第102页
PN 141-400 www.formfactor.com Positioners and Posit ioner Accesso ries • 86 Revision 57, February, 2023 Probe Station A ccessories • Opt imized for CM300xi and El ite 300 St ation Pl atforms • Mi crometer set planarity a…
PN 141-400 www.formfactor.com Positioners and Positioner Accessories • 85
Revision 57, February, 2023 Probe Station Accessories
Compatibility
• SUMMIT200, CM300xi, Elite 300
141-779 — mmW Large Area Positioner (W)
Features
• Use d for high-performance single-
ended/differential broadband/ mm-
Wave, sub-THz S-parameters, and
source/load-pull, RF noise probing
• Use d with Infinity / ACP / T-Wave
high performance RF probes
• 3 axis large area positioner for mmWave probes
• Optimized for CM300xi and Elite 300 Station Platforms
• Micrometer set planarity ad justment
• Industry standard RF probe mount
Specifications
• Feature resolution: 3 μm ( 0.12 mils)
• Travel range:
– X/Y: 150 mm (5.9 in)
– Z: 12.5 mm (0.5 in) (z-axis control: cw=down, ccw=up)
• Micrometer set planarity ad just: ±5°
• 2-port probe tip separation
• Adjustable for MicroChamber TopHat: 40 mm (1.6 in for Elite) and
43 mm (1.7 in for CM300xi)
• Without MicroChamber TopHat: TBD mm (y in)
• Mount: bolt-down
• Footprint: 204 x 204 mm (8 in)
• Weight = approx. 11 kg (23 pounds)
Configurations
• Use on platen left loc ation as West positioner (2-port)
Compatibility
• SUMMIT200, CM300xi, Elite 300
181-895 — mmW Large Area Positioner HTS (E)
Features
• Used for high-performance
single-ended/differential
broadband/ mm-Wave, sub-THz
S-parameters, and s ource/load-
pull, RF noise probing
• Used with Infinity / ACP / T-Wave
high performance RF probes
• Precision 3 axis l arge area
positioner for mmWave probes
• Optimized for CM300xi and Elite
300 Station Platforms
• Micrometer set planarity
adjustment
• High temperature stability (HTS)
• Recommended for testing at high
temperatures or multiple
temperatures
Specifications
• Feature resolution: 3 μm (0.12 mils)
• Travel range:
– X/Y: 15 0 mm (5.9 in)
– Z: 12.5 mm (0.5 in) (z-axis control: cw=down, ccw=up)
• Micrometer set planarity adjust: ±5°
• 2-port probe tip separation
• Adjustable for MicroChamber TopHat: 40 mm (1.6 in for Elite) and
43 mm (1.7 in for CM300xi)
• Without MicroChamber TopHat: TBD mm (y in)
• Mount: bolt-down
• Footprint: 204 x 204 mm (8 in)
• Weight = approx. 11 kg (23 pounds)
Configurations
• Use on platen right location as East pos itio ner (2-port)
Compatibility
• CM300xi with Top Hat, Elite 300
181-896 — mmW Large Area Positioner HTS (W)
Features
• Used for high-performance single-
ended/differential broadband/ mm-
Wave, sub-THz S-parameters, and
source/load-pull, RF noise probing
• Used with Infinity / ACP / T-Wave
high performance RF probes
• Precision 3 axis l arge area positioner for mmWave probes
4-port configuration using
East mmWave positioner,
West mmWave positioner,
and 2 E/W RF positioners
placed in N/S positions
PN 141-400 www.formfactor.com Positioners and Positioner Accessories • 86
Revision 57, February, 2023 Probe Station Accessories
• Optimized for CM300xi and Elite 300 Station Platforms
• Micrometer set planarity ad justment
• High temperature stability (HTS)
• Rec ommended for testing at high temperatures or multiple
temperatures
Specifications
• Feature resolution: 3 μm ( 0.12 mils)
• Travel range:
– X/Y: 150 mm (5.9 in)
– Z: 12.5 mm (0.5 in) (z-axis control: cw=down, ccw=up)
• Micrometer set planarity ad just: ±5°
• 2-port probe tip separation
• Adjustable for MicroChamber TopHat: 40 mm (1.6 in for Elite) and
43 mm (1.7 in for CM300xi)
• Without MicroChamber TopHat: TBD mm (y in)
• Mount: bolt-down
• Footprint: 204 x 204 mm (8 in)
• Weight = approx. 11 kg (23 pounds)
Configurations
• Use on platen left loc ation as West positioner (2-port)
Compatibility
• CM300xi with TopHat, Elite 300
SUMMIT 11000/12000 RF AND MICROWAVE
POSITIONERS
133-525 — mmW Positioner, Manual, West Positioner
Features
• Precision 3 axis large area
positioner for Waveguide and
1.0 mm coaxial probes
• True vertical Z-axis avoids
probe damage when probes
are in close proximity to each other (thru measurements) and ea sy
to view initial contact for accurate pr obe placement
• Quick release mechanism on X and Y axes for rapid test set-up
• Micrometer set planarity ad justment
• Industry standard RF probe mount
• Includes brackets to secure common test heads
Specifications
• X travel: 132 mm (5.2 in)
• Y travel: 143 mm (5.6 in)
• Z travel: 12.5 mm (0.5 in) (z-axis control: c w=down, ccw=up)
• Micrometer set planarity ad just: ±5°
• Probe mount interface: 3 hole FormFactor standard design, with
locating pin
Configurations
• Use on platen right location as West positioner
Compatibility
• Summit 11000/12000, S300
133-528 — mmW Positioner, Manual, East Position
Features
• Precision 3 axis l arge area
positioner for Waveguide and
1.0 mm coaxial probes
• True vertical Z-axis avoids
probe damage when probes
are in close proximity to each other (thru measurements) and easy
to view initial co ntact for accurate probe placement
• Quick release mechanism on X and Y axes for rapid test set-up
• Micrometer set planarity adjustment
• Industry standard RF probe mount
• Includes brackets to secure common test heads
Specifications
• X travel: 132 mm (5.2 in)
• Y travel: 143 mm (5.6 in)
• Z travel: 12.5 mm (0.5 in) (z-axis control: cw=down, c cw=up)
• Micrometer set planarity adjust: ±5°
• Probe mount interface: 3 hole FormFactor standard design, with
locating pin
Configurations
• Use on platen left location as East positioner
Compatibility
• Summit 11000/12000, S300
PN 141-400 www.formfactor.com Positioners and Positioner Accessories • 87
Revision 57, February, 2023 Probe Station Accessories
Positioner Accessories
DCM POSITIONER ACCESSORIES
138-023 — Bracket for Keithley 4200-PA-1 for DPP2xx
Positioner
Features
• Positions the Preamp close to the wafer/
device under test
• Isolated from the thermal environment of
the wafer and station platen for highly
stable measurements
• Mounts to Z axis to minimize cable flexure
between the Amp and probe
Kit Contents
• Mounting bracket
• Mounting hardware
Compatibility
• Elite 300, Summit 11000/12000, S300, M150, Alessi
RF POSITIONER ACCESSORIES
107-088 — Bracket Mount for Bias Tee/Keysight E4991A
Module, for RF Positioners
Features
• Accessory mounting kit for RF
positioners
• Use d for bias tees
• Use d for test head modules
such as Keysight E4991 test
heads
• Slotted mounting holes for
easy multiple use adaptation
Kit Contents
• Mounting plate
• Plate mounting h ardware
Compatibility
• Elite 300, Summit 11000/12000, S300, M150, Alessi
141-858 — FPC Mount for RF Positioners
Features
• Adapts from standard FormFactor 3-hole
mount to FPC style mount
• Enables the FPC probe to swing to reach
probing target
Specifications
• Compatible with standard 40 mm chuck
below platen configurations
• Compatible with POS-RF positioners
157-451 — DC Tip Holder
Features
• Mounts a DC needle to any RF probe
mount
• Requires 100805 (50 cm / 20 in] or 100751
(150 cm / 60 in) coaxial cable a rm
Specifications
• Leakage: < 5fA
• Capacitance: <4pF
174-889 — Summit 11000/12000 Platen Adapter
Features
• Adapts the Summit
11000/12000 station
platen to enable
mounting of RPP404/
RPP504 positioners
• Requires one adapter per side
Compatibility
• Summit 11000/12000
174-973 — EPS Platen Adapter
Features
• Adapts the EPS station
platen to enable
mounting of RPP404/
RPP504 positioners
• Requires one adapter per positioner
Compatibility
• EPS150, EPS200