141-400-57-probestationaccessoriescatalog - 第110页

PN 141-400 www.formfactor.com Probe Card Holders • 94 Revision 57, February, 2023 Probe Station A ccessories Pr o be Ca r d Ho l de r s and A cce s so rie s CM3 00 XI 171 -2 26 — Prob e Car d Hol de r 4.5 in f or shi eld…

100%1 / 169
PN 141-400 www.formfactor.com Probe Card Holders • 93
Revision 57, February, 2023 Probe Station Accessories
Probe Card Holders
Probe Card Holders and Accessories
PA, PM, DSP
100529 — Probe Card Holder, 6x7 in
Features
• Accepts 15 0 mm (6 in) wide
probe card
• Probe card located below platen
• Flexible probe arms
recommended if DPP3xx is u sed
• Low profile probe card holder with
bridge mounted 5° Theta and planarity adjustment
Compatibility
• PA300, PM300, PA200, PM8, PM5, all DSP stations
129912 — Probe Card Holder, 4.5 x 7 in to 4.5 x 11 in
Features
• Top loader/front loader
functionality
• Maximum probe card
thickness: 23 mm (0.9 in),
front loading
• Very stiff design
• Requires Platen Insert Ring
PH/PC for use in PM300BEP (132521)
Specifications
• For standard formats:
– Width: 114 mm (4.5 in)
– Length: 178- 279 mm (7-11 in)
• Theta adjustment range: 5°
• Minimum tip drop: 2 mm (0 .08 in)
Compatibility
• PA300, PM300, PA200 and PA200 BlueRay, PM8, PM5, al l DSP
stations
PROBE CARD HOLDER ACCESSORIES
51127 — Celadon Cable Harness
Features
• 25 triaxial cable harness for Celadon probe cards (single site, multi
site), MiniTiles or VersaTiles, leng th 2 meter (6.6 ft)
Note: The double number o f cables in the harness or even several
harnesses are required for Kelvin Connections (two cables to each
probe)
• Cable end to the prober: 26 pole microcoax connector AMP (1
Ground)
• Cable end to test meter: 25 3-lug triax p lugs
100651 — Insert for Probe Card Holder
Features
• Used with probe cards
with probe card holder
and HF platen
• When DPP positioners
are used, RPP305-B
must be removed
Compatibility
• MPS150, EPS150, PM8, PM300, PA200, PA300 with RF platen,
PN 141-400 www.formfactor.com Probe Card Holders • 94
Revision 57, February, 2023 Probe Station Accessories
Probe Card Holders and Accessories
CM300XI
171-226 — Probe Card Holder 4.5 in for shielded
CM300xi with Top Chambers
Features
• Use d with 114 mm (4.5 in)
width probe cards with the
CM300xi Advanced and
probe card
• Integrated ProtecPlate for
optimal low-level accuracy
• Frost-free probing
• Simultaneous usage with positioners
• Simple and fast installation
• Easy compensation for different tip drop
• Check probe card for mechanical compatibility (electric
connectors, tip drop, wire harness, etc.)
Specifications
• Probe card support:
– Max. probe card length = 284 mm (11.2 in) (max. 142 mm [5.6
in] from probe center to front/rear)
– Tip drop adjustable for 3.0 to 5.0 mm (in 0.5 mm steps)
Compatibility
• CM300xi
171-976 — Probe Card Holder 4.5 in for shielded
CM300xi with Cover
Features
• Use d with114 mm
(4.5 in) width
probe cards
inside the EMI/
RFI shielded and
light-tight CM300xi environment
• Integrated AttoGuard for optimal low-level accuracy
• Frost-free probing
• Use positioners in conjunction with the probe ca rd by removing the
PCH cover (open environment)
• Simple and fast installation
• Easy compensation for different t ip drop
• Check probe card for mechanical compatibility ( electric
connectors, tip drop, wire harness, etc.)
Specifications
• Probe card su pport:
– Max. probe card length = 284 mm (11.2 in) (max. 1 42 mm [5.6
in] from probe center to front/rear)
– Tip drop adjus table for 3.0 to 5.0 mm (in 0.5 mm steps)
Compatibility
• CM300xi
171-977 — Probe Card Holder 4.5 in for shielded
CM300xi with Cover and Celadon Probe Cards
Features
• Used with 114 mm
(4.5 in) width probe
cards inside the
EMI/RFI shielded
and light-tight
CM300xi
environment
• Integrated
AttoGuard for
optimal low-level
accuracy
• Frost-free probing
• Use positioners in conjunction with the probe ca rd by removing the
PCH cover (open environment)
• Simple and fast installation
• Easy compensation of different tip drop
• Check probe card for mechanical compatibility ( electric
connectors, tip drop, wire harness, etc.)
Specifications
• Probe card su pport:
– Max. probe card length = 284 mm (11.2 in) (max. 1 42 mm
[5.6 in] from probe ce nter to front/rear)
– Tip drop adjus table for 3.0 to 5.0 mm (in 0.5 mm steps)
Compatibility
• CM300xi
PN 141-400 www.formfactor.com Probe Card Holders • 95
Revision 57, February, 2023 Probe Station Accessories
173-020 — 4.5 in Probe Card Holder, HTS, for Shielded
CM300xi
Features
• Probe card holder for
114 mm (4.5 in)
rectangular probe
cards
• Maintains dark, dry,
EMI/RFI shielded
environment (CM300xi
shielded an d fully-
shielded)
• Can be oriented E/W/ S/N for short cables to test equipment
• Easy 3-point probe card planari zation
• Simple and fast installation, quick changeover from positioners to
probe card
• High thermal stability design an d materials
• Check probe card for mechanical compatibility (electric
connectors, nominal tip drop 4.7 mm [0.185 in], e tc.)
Specifications
• Temperature range supported: -6 0°C (-76°F) to 300°C (572°F)
• For unattended testing of pads down to 3 0 x 30 µm (1.12 x
1.12 mils) at temperatures between -55°C to +175°C (-67°F to
+347°F)
• Probe card support:
– For Celadon T40 probe cards or compatible
– Max. probe card length = 160 mm (6.3 in) (max. 8 0 mm [3.1 in]
from probe center to front/rear)
• Height adjustability:
– For nominal tip drop of 4.7 mm (0. 185 in)
– ProbeHorizon tolerates +/-0.5 mm (0.02 in) of nominal tip drop
• Max planarization height range: up to 40 mils compression at each
planarization point (3)
• Max probe card force: 20 kg (44 lb)
Compatibility
• CM300xi
ELITE 300/SUMMIT200/TESLA200
177-600/X2-PIPCH — Probe Card Holder
Features
• Universal probe card h older for
114 mm (4.5 in) rectangu lar probe
cards
• PCH can be oriented E/W/S/N for
short cables run to test equipment
• Low profile de sign allows
simultaneous probe card and
internal node needle probes
• Quick changeover from positioners to probe card
• Supports multiple probe card needle drafts with height adjustment
• Easy 3 -point probe card planarization
Specifications
• Temperature range supported: -60°C to 300°C (-76°F to 572°F)
• Probe card su pport:
– 114 mm (4.5 in) wide rectangular cards
– Max. probe card length with edge co nnector: 11.375
– Nee dles for 216 mm (8.5 in) long cards can be up to 64 mm (2.5
in) off center
• Probe card draft (distance between bottom of probe card and
probe tip):
Shown with quick
access cover
removed
• Front view of this
section is shown in
Standard PCH rail
assembly (PN 162-
000) and Optional
deep PCH rail
assembly (PN 162-
001) images below
• All units are in mm