141-400-57-probestationaccessoriescatalog - 第129页

PN 141-400 www.formfactor.com Probe Mounts/Holders and Pro bes • 1 13 Revision 57, February, 2023 Probe Station A ccessories RF P RO BE A RMS , P A20 0 B L UE R A Y 142 13 9 — P r ob e Arm, RPP 3 05-S Ea st , Righ t, 2 P…

100%1 / 169
PN 141-400 www.formfactor.com Probe Mounts/Holders and Probes • 112
Revision 57, February, 2023 Probe Station Accessories
RF PROBE ARMS, MICROALIGN
133302 — Probe Arm, RPP305, North-S outh
Features
• For MicroAlign systems
• 4 probe setup
• For adaptation of HF probes or probe
wedges
• For positioning the probe at front or rear
side of DUT
• Probe mounting plate can be levelled, adjustment drive screw
located at positioner end of the arm for easier op eration
• Requires HF add-on platen or RPP305-M
• For use with RPP305 positioners
Compatibility
• PM300PS, PA300 MicroAlign + RPP305 (and former PH25 0)
133303 — Probe Arm, RPP305, East-West
Features
• For MicroAlign systems
• 4 probe setup
• For adaptation of HF probes or
probe wedge s
• For positioning the probe at left or
right side of DUT
• Probe mounting plate can be
levelled, adjustment drive screw
located at positioner end of the arm for easier op eration
• Requires HF add-on platen or RPP305-M
• For use with RPP305 positioners
Compatibility
• PM300PS, PA300 MicroAlign + RPP305 (and former PH25 0)
134006 — Probe Arm, RPP305, East-West
Features
• For MicroAlign systems
• To accompany 133303 to place two
RPP305 (left and right) together in
front of the operator
• For adaptation of HF probes or probe
wedges
• For positioning the pr obe at left or right side of DUT
• Probe mounting plate can be levelled, adjustment drive screw
located at end of the arm for easier operation
• Requires HF add -on platen on probe platen or RPP305-M
• For use with RPP305 positioners
Compatibility
• PM300PS, PA300 MicroAlign + RPP305 (and former PH250)
144777 — Probe Arm, RPP210-S, East-West
Features
• For use with HF probes o r wedges
• Positions the probe at the left or right side
of DU T
• Horizontal probe mounting plate can be
levelled
• For use with HF platen and MicroAlign
• For use with RPP210-S (and former
PH110) positioners
Compatibility
• All PM/PA stations with RF platen, CM300 and PA300 MicroAlign,
RPP210-S (and former PH110)
144778 — Probe Arm, RPP210-S, North-South,
MicroAlign
Features
• For MicroAlign systems
• For use with HF probes o r wedges
• Positions the probe at th e front or rear side
of DU T
• Horizontal probe mounting plate can be
levelled
• For use with HF platen and MicroAlign
• For use with RPP210-S positioners
Compatibility
• All PM/PA stations with RF platen, CM300xi and PA300
MicroAlign, RPP210-S (and former PH110)
PN 141-400 www.formfactor.com Probe Mounts/Holders and Probes • 113
Revision 57, February, 2023 Probe Station Accessories
RF PROBE ARMS, PA200 BLUERAY
142139 — Probe Arm, RPP305-S East, Right,
2 Positioners, BlueRay
Features
• For positioning the probe on the right side of
DUT
• With integrated probe planarization
Compatibility
• RPP305-B-S, RPP305-M-S
142140 — Probe Arm, RPP305-S West,
Left, 2 Positioners, BlueRay
Features
• For positioning the probe on the left side of
DUT
• With integrated probe planarization
Compatibility
• RPP305-B-S, RPP305-M-S
142143 — Probe Arm, RPP305-S East-West,
4 Positioners, BlueRay
Features
• For positioning the probe on the left or
right side of DUT
• With integrated probe planarization
Compatibility
• RPP305-B-S, RPP305-M-S
142148 — Probe Arm, RPP305-S North-South,
4 Positioners, BlueRay
Features
• For positioning the probe at the front or rear of
DUT
• With integrated probe planarization
Compatibility
• RPP305-B-S, RPP305-M-S
PROBE ARM, OPTICAL FIBER
145533 — Probe Arm, Optical Fiber 125 µm, DPP2xx
Features
• Allows placement of glass fiber over the wafer
• Mount to DPP2xx
• Fiber tip visible in microscope image
• Front part of arm can be horizontally rotated
• Other fiber adaptations on request
Specifications
• Ferrule diameter 250 µm (9.8 mils) for 125 µm (4.9 mils) fiber cores
and jacket
• Fiber angle vertical adjustable 80°-90°
Compatibility
• DPP2xx (and former PH110)
PROBE ARMS, PM5 POWER SYSTEMS
145303 — Probe Holder Short
Features
• Stainless steel design for high rigidity
and minimum thermal drift
• To connect any individual probe to a
RPP210 positioner for use with PM5
Power system
Compatibility
• PM5 Power
144777 — Probe Arm, RPP210-S, East-West
Features
• For use with HF probes o r wedges
• Positions the probe at the left or right side
of DU T
• Horizontal probe mounting plate can be
levelled
• For use with HF platen and MicroAlign
• For use with RPP210-S (and former
PH110) positioners
Compatibility
• All PM/PA stations with RF platen, CM300 and PA300 MicroAlign,
RPP210-S (and former PH110)
PN 141-400 www.formfactor.com Probe Mounts/Holders and Probes • 114
Revision 57, February, 2023 Probe Station Accessories
PROBES, PM5 POWER SYSTEMS
142693 — Probe 10 kV
DANGER
To use this probe safely, your station must be configured with a
Tesla specific light curt ain or approved sa fety interlocks. Failure to
employ these safety measures can result in serious injury or death.
Features
• Highly isolated needle clamp for
standard single tips
• Stainless steel design for h igh rigidity
and minimum thermal drift
• For use with temperature chucks up to
300°C (572°F)
• Requires arm holder for RPP210
Specifications
• 1.2 m (4 ft) coax cable with 10 kV plug
• Operating voltage up to 10 kV
Compatibility
• PM5 Power
145297 — Probe HV Triax / 3 kV
DANGER
To use this probe safely, your station must be configured with a
Tesla specific light curt ain or approved sa fety interlocks. Failure to
employ these safety measures can result in serious injury or death.
Features
• Highly isolated needle clamp for
standard single tips like PTT needles
• For use with temperature chucks up to
300°C (572°F)
• Stainless steel design for h igh rigidity
and minimum thermal drift
• Requires arm holder for RPP210
Specifications
• 1.2 m (4 ft) coax cable with HV triax plug
• Operating voltage up to 3 kV with lowest leakage
Compatibility
• PM5 Power
145298 — Probe HV Coax / 3 kV
DANGER
To use this probe safely, your station must be configured with a
Tesla specific light curtain or approved safe ty interlocks. Failure to
employ these safety measures can result in serious injury o r death.
Features
• Highly isolated needle clamp for standard
single tips
• Stainless steel design for high rigidity and
minimum thermal drift
• For use with temperature chucks up to
300°C (572°F)
• Requires arm holder for RPP210
Specifications
• 0.75 m (2.5 ft) coax cable with SHV plug
• Operating voltage up to 3 kV
Compatibility
• PM5 Power
145300 — Probe HV Triax / Kelvin / 3 kV
DANGER
To use this probe safely, your station must be configured with a
Tesla specific light curtain or approved safe ty interlocks. Failure to
employ these safety measures can result in serious injury o r death.
Features
• For triaxial I/V and Kelvin
measurements
• Highly isolated needle clamp for
standard single tips
• Stainless steel design for high rigidity
and minimum thermal drift
• For use with temperature chucks up to 300°C (572°F)
• Connector sockets for CommonRing cables
• Requires arm holder for RPP210
Specifications
• 2 x 1.2 m (4 ft) 50 Ohm triaxial c able with HV Triax plug
• Operating voltage up to 3 kV
Compatibility
• PM5 Power