141-400-57-probestationaccessoriescatalog - 第42页
PN 141-400 www.formfactor.com Lab Accessories and Miscellaneous • 26 Revision 57, February, 2023 Probe Station A ccessories Lab A ccessories a n d M i s c e l l a n e o u s T abl es 115 40 5 — V i br at ion Iso lat io n …
PN 141-400 www.formfactor.com Elite 300 • 25
Revision 57, February, 2023 Probe Station Accessories
MOUNTING KITS, PLATES, AND MISCELLANEOUS
ACCESSORIES
143-428 — Keysight 42941A Mounting Kit
Features
• Mounting bracket to hold Keysight
42941A probe
• Compatible with CM300xi and Elite
300 RPP305 positioners
Kit Contents
• 2 cables:
– SMA (m) to SMA (m)
– 120 mm (4.7 in)
• Mounting bracket for
RPP305-EL positioner
Compatibility
• CM300xi, Elite 300
143-429 — Mounting Plate for B1500A SCUU
Compatibility
• CM300xi, Elite 300
144-422 — Mounting Plate for B1500A ASU, E5288A
Atto Sense Unit
Compatibility
• CM300xi, Elite 300
177-560 — Top Hat Assembly, 4 Port, 300 mm
Features
• Enables the use of single or dual
Keysight N5291 modules with
Infinity and ACP probes on
CM300xi and Elite 300 stations
with MicroChamber
• Enables full thermal ca pability
Configuration
• Intended for use with positioner assemblies RPP404-EW-120 and
RPP404-W-120, RPP304-NS-67
Compatibility
• CM300xi, Elite300
Mounting bracket shown on
RPP305 positioner with Keysight
high impedance probe
Mounted plate
Plate mou nts on universal
accessory mounting rails
Keysight SCUU
mounted to plate
Mounted plate
Keysight ASU
mounted to plate
Plate mou nts on universal
accessory mounting rails
PN 141-400 www.formfactor.com Lab Accessories and Miscellaneous • 26
Revision 57, February, 2023 Probe Station Accessories
Lab Accessories and Miscellaneous
Tables
115405 — Vibration Isolation Table, VIT801
Features
• 1 pressure input regulator with gauge
• Storage s helf 550 x 320 mm (21.6 x
12.6) at rear bottom
• Sup port arm systems optionally
available
Specifications
• W x D x H = 800 x 800 x 750 mm (31.5
x 31.5 x 29.5 in)
• Adjustable two-chamber air damping system with resonance
frequency of 2.5Hz
• Automatic load leveling
• Max. load capacity: 360 k g (794 lb)
• Air pressure required: ~1.5 to 4 bar, depending o n load
• Normal working pressure: 2 to 3.5 bar
Compatibility
• PA200, PM8, MPS150, EPS150
117931 — SE1200 EMC Adapter for VIT951/PA300
Features
• Connects the SE1200EMC to the
PA300 vibration isolating table
• Impacts to the ShieldEnclosure
are isolated f rom the probe
station
• Electromagnetically shielding
Compatibility
• PA300
135100 — Vibration Isolation Table, VIT701
Features
• For BlueRay and APS/SPS200TESLA
use
• Prepared for 483 mm (19 in) devices
• Equ ipped with docking points for
upgrade with BlueRay Loader Module to
fully automatic probe station
• Requires compressed air (min. 6 bar,
8 mm [0.31 in] hose).
• Meas urement shelf and monitor/keyboard arm optionally available
Specifications
• W x D x H = 700 x 700 x 750 mm (27.5 x 27.5 x 29.5 in)
• Adjustable two-chamber air damping system with resonance
frequency of 2.5Hz
Compatibility
• PA200 BlueRay, PA200 DS BlueRay, APS/ SPS200TESLA
138815 — Probe Station Table 700
Features
• For BlueRay and APS/SPS200TESLA
use
• Prepared for 483 mm (19 in) devices
• Equipped with docking points for
upgrade with BlueRay Loader Module
to fully automatic probe station
• Measurement shelf and monitor/
keyboard arm optionally available
Specifications
• W x D x H = 700 x 700 x 750 mm (27.5 x 27.5 x 29.5 in)
Compatibility
• PA200 BlueRay, PA200 DS BlueRay, APS/ SPS200TESLA
142-032 — Vibration Isolation Table, STANDARD for
200 mm Stations, 40 in x 40 in
Features
• Heavy duty frame and steel tabletop
• Integrated rolling casters
• Seismic restraint kit
• Storage shelf below tabletop
• Ergonomic front support bar
• Optional side instrument shelves a nd accessories available
Specifications
• Dimensions:
– Steel tabletop (W x D): 1016 x 1016 mm (40 x 40 in)
– Table operating height: 813 mm (32 in)
• Weights:
– Steel tabletop:104 kg (230 lb)
– Complete system (including t abletop): ~218 kg (~480 lb)
• Operation:
– Optimum air pressure: 25 - 60 psi
– Input a ir pressure: min 20 psi (approx.) - max 80 psi
– Max weight capacity 703 kg (1,150 lb) (@ 80 ps i)
PN 141-400 www.formfactor.com Lab Accessories and Miscellaneous • 27
Revision 57, February, 2023 Probe Station Accessories
– Optimum load on the tabletop is 90-363 kg (200-800 lb)(since
the pressure is directly related to the mass sitting on the
tabletop, the operating pressure determines this range)
– Vibration isolation: typical performance better than 0db at 6 Hz,
with –6 dB per octave roll-off to 48 Hz and >–18 dB attenuation
above 48 Hz (with a Summit 12000 seri es probe station or
equivalent load)
Compatibility
• Summit, M150, BTS
177-396 — Vibration Isolation Table, DELUX Package for
200 mm Stations
Features
• Heavy duty frame and steel tabletop
• Integrated rolling casters
• Seismic restraint kit
• Storage s helf below tabletop
• Ergonomic front support bar
• Optional side instrument she lves and
accessories available
• Computer accessory mounting kit for
keyboard, mouse, joystick
• Multi-directional LCD monitor supp ort arm (VESA).
• Enclosed system (side walls and front access door).
Specifications
• Dimensions:
– Steel tabletop (W x D): 1016 x 1016 mm (40 x 40 in)
– Table operating height: 813 mm (32 in)
• Weights:
– Steel tabletop:104 kg (230 lb)
– Complete system (including tabletop): ~218 kg (~480 lb)
• Operation:
– Optimum air p ressure: 25 - 60 psi
– Input air pressu re: min 20 psi (approx.) - max 80 psi
– Max weight capaci ty 703 kg (1,150 lb) (@ 80 psi)
– Optimum load on the tabletop is 90-363 kg (200-800 lb) (since
the pressure is directly related to the mass sitting on the
tabletop, the operating pressure determines this range)
– Vibration isolation: typical performance better than 0 db at 6 Hz,
with –6 dB per octave roll-off to 48 Hz and >–18 dB attenuation
above 48 Hz (with a Summit 12000 seri es probe station or
equivalent load)
Compatibility
• Summit
143-567 — Side Instrument Shelf for Table
Features
• Universal design can mount on left or right
side of table
• Heavy duty design can hold multiple
instruments
• Easy mounting enables quick reconfiguration
Specifications
• Dimensions:
– Side shelf (W x D): 533 x 1016 mm (21 x 40 in), positioned with
a 25.4 mm (1 in) space between the side shelf and main steel
tabletop
– Table width (with 2 si de shelves installed, left and right): 2184.4
mm (86 in)
169-130 — Vibration Isolation Platform VIP601
Features
• Compact, vibration dampening
platform
• Suitable for MPS150 and EPS150
probe stations
Specifications
• Dimensions (WxDxH): 598 x 530 x 87 mm (23.5 x 20.9 x 3.4 in)
• Max. load at 4 bar : 530N per damper
• Max load capacity at nominal pressure (4 bar): 200 kg
• Internal frequency: 2.5 Hz (vert.), 2.5 Hz (hor.), depending o n load
Compatibility
• MPS150, EPS150 and also with SE750
171-512 — Optional Cover and Earthquake Kit for
VIP601
Features
• Cover for VIP601
• Earthquake protection
Specifications
• Fixed link between pr obe station
and p latform p rovides seismic stability
• Enables probe stat ion movement together with the platform in case
of relocation or a seismic event
Compatibility
• VIP601
• Not configurable with EPS-ACC-SE750-COAX and EPS-ACC-
SE750-TRX (earthquake protection already included)